Rep Power: 0

Firstly I would like to say, this is a great awesome 7th generation civic forum site.

I have a slight problem. I hope someone who had install Greddy Emanage or experience ECU troubleshooter, could help me out.
I had install emanage into my civic
7th generation 1.7L direct ignition, it was running quite well except for
some very low idling. I waited for my original support tools from the
supplier which came in today, hoping to resolve my idling problem
with some fine tuning, as i was setting it up, the system requested
my PC to update the emanage main unit. After the update, i was not
able to start my car.

I did check for the 4 basic requirements for combustion, there was
fuel(fuel pump working), compression and airflow but now no
ignition/spark. I have check thru all the wirings, there isn't any
problems with wiring as the car was runing well for a few weeks.
There isn't any engine check light problems, infact, I tried to
unhook the map sensor to throw a engine check light, the ECU did not
detect the problem at all

I hope if someone out there has any suggestion to trouble shoot this
little problem of mine. Thank you ahead for any help,