Mechanical Problems/Vehicle Issues and Fix-it Forum If you've got a problem you just can't figure out, a noise you can't diagnose, or a Check Engine Light that won't go away, ask about it here!

Got into a fender bender..

Old Jul 16, 2013
  #1  
BayRaider510's Avatar
Thread Starter
Registered!!
 
Joined: Apr 2013
Posts: 4
Likes: 0
Rep Power: 0
BayRaider510 is an unknown quantity at this point
Got into a fender bender..

Got into a little fender bender, can you guys give me your best estimate on how much this might cost?



Reply
Old Jul 16, 2013
  #2  
GolNat's Avatar
Prelude Owner
iTrader: (7)
 
Joined: Sep 2011
Posts: 6,200
Likes: 357
From: DE
Rep Power: 243
GolNat is a splendid one to beholdGolNat is a splendid one to beholdGolNat is a splendid one to beholdGolNat is a splendid one to beholdGolNat is a splendid one to beholdGolNat is a splendid one to beholdGolNat is a splendid one to beholdGolNat is a splendid one to beholdGolNat is a splendid one to beholdGolNat is a splendid one to beholdGolNat is a splendid one to behold
Re: Got into a fender bender..

You can save some money if you can find a quarter panel in a junk yard. The bumper does not appear to be damaged except for the paint so that should buff out and get resprayed.
Reply
Old Jul 16, 2013
  #3  
got2run5's Avatar
Registered!!
 
Joined: Feb 2011
Posts: 460
Likes: 0
From: Midwest
Rep Power: 189
got2run5 will become famous soon enoughgot2run5 will become famous soon enough
Re: Got into a fender bender..

They sell new prepainted fenders on ebay that you could buy and install easily but it might not match 100% (due to fading etc) and it looks like the bumper can be buffed out for the most part.
Reply
Old Jul 16, 2013
  #4  
pjb3's Avatar
Registered!!
 
Joined: Jul 2009
Posts: 425
Likes: 1
Rep Power: 209
pjb3 is a glorious beacon of lightpjb3 is a glorious beacon of lightpjb3 is a glorious beacon of lightpjb3 is a glorious beacon of lightpjb3 is a glorious beacon of lightpjb3 is a glorious beacon of light
Re: Got into a fender bender..

Wouldn't it be easier to take it by a couple of shops and get estimates? If I were to guess I would expect it to be in the $750 to $1000 range.
Reply
Old Jul 16, 2013
  #5  
got2run5's Avatar
Registered!!
 
Joined: Feb 2011
Posts: 460
Likes: 0
From: Midwest
Rep Power: 189
got2run5 will become famous soon enoughgot2run5 will become famous soon enough
Re: Got into a fender bender..

It would be easier, not cheaper. Or for $170 you can buy a painted part off ebay and do it yourself.
Reply
Old Jul 17, 2013
  #6  
pjb3's Avatar
Registered!!
 
Joined: Jul 2009
Posts: 425
Likes: 1
Rep Power: 209
pjb3 is a glorious beacon of lightpjb3 is a glorious beacon of lightpjb3 is a glorious beacon of lightpjb3 is a glorious beacon of lightpjb3 is a glorious beacon of lightpjb3 is a glorious beacon of light
Re: Got into a fender bender..

Originally Posted by got2run5
It would be easier, not cheaper. Or for $170 you can buy a painted part off ebay and do it yourself.
He asked for estimates, not they cheapest way to get it fixed. Getting real estimates makes more sense than asking people to guess.

As far as a $170 fender from Ebay, good luck. He may get lucky but more likely he will get a POS that doesn't fit correctly, is cheaper metal and has poor paint. It appears that his car is silver and since silver is one of the hardest colors to match, a prepainted fender will not be a good color match. Fit and finish may not be important so an Ebay fender may be fine but it makes more sense to get real estimates and know how much the difference will be.
Reply
Old Jul 17, 2013
  #7  
got2run5's Avatar
Registered!!
 
Joined: Feb 2011
Posts: 460
Likes: 0
From: Midwest
Rep Power: 189
got2run5 will become famous soon enoughgot2run5 will become famous soon enough
Re: Got into a fender bender..

You're right, he asked for an estimate as to how much it might cost. He did not specify whether he could replace it himself or what his price range is.

Unfortunately, these are no longer $20k cars and most people probably don't want to spend 1/5 of the car's value replacing a fender. I simply offered a more economical solution to his problem if he chooses to go that route. If you read my previous post, I admitted to the issues of going with the economical route to let him make an informed decision.

Last edited by got2run5; Jul 17, 2013 at 01:49 PM.
Reply
Old Jul 18, 2013
  #8  
pjb3's Avatar
Registered!!
 
Joined: Jul 2009
Posts: 425
Likes: 1
Rep Power: 209
pjb3 is a glorious beacon of lightpjb3 is a glorious beacon of lightpjb3 is a glorious beacon of lightpjb3 is a glorious beacon of lightpjb3 is a glorious beacon of lightpjb3 is a glorious beacon of light
Re: Got into a fender bender..

I agree, it's really about making an informed decision so there is no right or wrong solution.

I have never purchased a body panel off Ebay and like most things you are more likely to hear about the bad than the good. My concerns would be shipping costs since it will probably have to go freight, fit since it may take hours to get it right or it may never fit correctly and lastly paint quality and match. I would say this is one time you would really want to research the seller since shipping it back would be expensive and they probably would not allow returns once you have tried to install it.
Reply
Related Topics
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Tedverseti
7th Generation Civic 2001 - 2005
3
Sep 29, 2015 05:41 PM
meicalnissyen
Mechanical Problems/Vehicle Issues and Fix-it Forum
7
Sep 25, 2015 12:12 AM
emiixo
Exterior
3
Sep 22, 2015 03:53 AM
rnaodm
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
Sep 21, 2015 12:42 PM
beeemerdude
1st - 5th Generation Civic 1973 - 1995
0
Jul 23, 2015 03:53 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:57 AM.