Rep Power: 0

I’m new to this site so hopefully I am posting this to the right spot. Anyhow I was hoping if anyone had any insight on what could be causing the following issues I’ve been dealing with the last few days……-Car repeatedly stalls for approx 6 secs when pressing on gas pedal. Especially if I am trying to accelerate or go after a red light.



-Hazard flashers turn on dash board by themselves when pressing on brake pedal



-When trying to use turn signals, it goes from its normal blinking pattern to a rapid blinking or it doesn’t turn on at all.



-Turn signal clicking sounds inside vehicle sometimes can’t be heard at all or it becomes a loud clicking sound.



-Turn signals would flash on dash board but not on outside of the vehicle



-One turn signal light seems to be brighter on dash board while the other is super dim on dashboard



-Hazard lights appear on dash board by themselves when pressing on brake pedal and they can’t be turned off by pressing on the actual hazard light button



-Hazard lights come on by themselves and stay solid on dash board



-when in reverse, turn signal lights in back turn on n stay dim

It mostly seems to be centered on my turn signals not working properly so any help would be appreciated.

 
Rep Power: 222

Sounds like you have a pretty bad short somewhere. Should be easy to find. Any work done recently?

 
Rep Power: 0

A few months ago I did get my Alternator, Starter, and Battery replaced. Other than that, I haven’t had anything else done lately.