clutch change Torque spec.s

Reply Subscribe

Thread Tools

Search this Thread

Dec 25, 2018

Aerose91

Thread Starter

Registered!!

Joined: Nov 2018

Posts: 43

Likes: 0

Rep Power: 0

Aerose91 is an unknown quantity at this point

clutch change Torque spec.s

Im replacing the clutch on my '06 EX with the 1.8l engine (R18 i believe?) and don't have a manual so I'm wondering if anyone has the torque spec.s for:

-Flywheel (87 i think?) I haven't done a clutch in years, are there timing marks on the flywheel? I'm putting a new one on
-Pressure plate (19 i think?)
-Tranny mount bolts to engine
-2 motor mounts, one from tranny to frame, other engine to sub frame
-The 4 long-*** sub-frame bolts in the corners that took me an entire day to get out because they were so siezed

Also, is the crank bolt on our cars torque to yield?

Thanks for any help guys & gals!

Dec 27, 2018

mightymouse0325

Registered!!

Joined: Jul 2018

Posts: 23

Likes: 0

Rep Power: 0

mightymouse0325 is an unknown quantity at this point

Re: Torque spec.s

The crank bolt I believe is somewhere between 34-40 ft lbs, then rotate it an additional 90 degrees, don’t quote me on that I could be wrong. I don’t remember the last one I replaced being torque to yield, but I do know that I have broken a few in the past. Most times you can call a local Honda dealer and they can tell you the torque specs

Dec 28, 2018

ezone

If you think a good mechanic is expensive, try hiring a bad one

Joined: Dec 2011

Posts: 32,017

Likes: 256

From: Midwest. Aiming about mid-chest

Rep Power: 518

Re: Torque spec.s

Quote:

and don't have a manual

Why TF not? Got a library card?

'06 1.8l engine (R18 i believe?)

-Flywheel 76 ft-lb

-Pressure plate 19

-Tranny mount bolts to engine 47

-The 4 long-*** sub-frame bolts 76

Quote:

Also, is the crank bolt on our cars torque to yield?

yes 51, +90 degrees