Sea Foam Motor Treatment
Thread Starter
Registered!!
iTrader: (1)
Joined: Jan 2004
Posts: 409
Likes: 0
From: Texas
Rep Power: 0 
Sea Foam Motor Treatment
Has any one here used Sea Foam to clean the internal engine (carbon and etc..) and etc.....?
I searched for it but nothing really, but googled it and found nothing but good things!
Thank you,
David
Sorry this is for internal cleaning not external cleaning.........not detailing!
http://www.seafoamsales.com/
I searched for it but nothing really, but googled it and found nothing but good things!
Thank you,
David
Sorry this is for internal cleaning not external cleaning.........not detailing!
http://www.seafoamsales.com/
Last edited by draganjr; Jun 18, 2004 at 08:32 AM.
Registered!!
iTrader: (3)
Joined: Aug 2001
Posts: 3,231
Likes: 0
From: Metro Detroit, Michigan
Rep Power: 0 
I used it all the time in my 94 GMC Sonoma. It got rid of a alot of carbon buildup in the vacuum system. I would also pour a tiny bit down my TB and it seemed to clean that out pretty good too.
Thread Starter
Registered!!
iTrader: (1)
Joined: Jan 2004
Posts: 409
Likes: 0
From: Texas
Rep Power: 0 
Originally Posted by bobbyd
I used it all the time in my 94 GMC Sonoma. It got rid of a alot of carbon buildup in the vacuum system. I would also pour a tiny bit down my TB and it seemed to clean that out pretty good too.
SEA FOAM was developed originally for the marine market—"That's why the great name SEA FOAM." Fred Fandrei, the founder of SEA FOAM, showed Evinrude Outboard Motors how to solve their stale fuel, varnish and carbon problems with its use. Because the product worked so well, and after many years of experimentation, SEA FOAM became a great problem solver in the automotive after market as well. It is renowned as the finest, most multifaceted and safest petroleum product of our times.
TRANS TUNE is a conditioner that is not a stop leak and is compatible with all automatic transmissions, power steering and hydraulic systems.
DEEP CREEP is a multi use penetrating lubricant and cleaner that powers through stuck parts and dissolves rust, varnish and carbon.
BUGS-B-GONE removes ugly bugs fast in 60 seconds or less and is safe on all surfaces.
When your vehicle has a rough idle, hesitates, stalls, pings or has an after run problem – this is often due to carbon buildup.
When your vehicle’s fuel injectors need cleaning – this is often due to residue left on injectors from poor burning fuels and contaminants.
SEA FOAM MOTOR TREATMENT
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
Joined: Jun 2002
Posts: 2,856
Likes: 0
From: Clovis, California, US
Rep Power: 320 

My only consern with this is that I think that it can mess up your cat. all of the carbon built up has to go some where and I'm just afraid to use it for fear that it might block the cat.
i use a similar (almost identical) product by GM called "GM Top Engine Cleaner"
there really is no problem/worries with the cats... this is something actually used and recommended by dealerships as well... i do it every 6 months since my engine is known for heavy oil consumption... i would be happy to provide a walkthrough for you if you like...
couple things to remember if doing it... 1) leave it sit... it does no good to just run it through the system.. it needs time to 'eat' away at the build up... i leave mine in 12+ hrs (i.e. overnight and blow it out in the a.m.) and 2) change your oil within 10-20 miles of blowing it all out after letting it sit... there's the chance (depending on your wear/rings/seals/etc) that the seafoam/cleaner can seep into your oil... and you don't want that... no need to change plugs (common misconception) because at the very least, it cleans them
there really is no problem/worries with the cats... this is something actually used and recommended by dealerships as well... i do it every 6 months since my engine is known for heavy oil consumption... i would be happy to provide a walkthrough for you if you like...
couple things to remember if doing it... 1) leave it sit... it does no good to just run it through the system.. it needs time to 'eat' away at the build up... i leave mine in 12+ hrs (i.e. overnight and blow it out in the a.m.) and 2) change your oil within 10-20 miles of blowing it all out after letting it sit... there's the chance (depending on your wear/rings/seals/etc) that the seafoam/cleaner can seep into your oil... and you don't want that... no need to change plugs (common misconception) because at the very least, it cleans them
Thread Starter
Registered!!
iTrader: (1)
Joined: Jan 2004
Posts: 409
Likes: 0
From: Texas
Rep Power: 0 
Originally Posted by lucky_topher
i use a similar (almost identical) product by GM called "GM Top Engine Cleaner"
there really is no problem/worries with the cats... this is something actually used and recommended by dealerships as well... i do it every 6 months since my engine is known for heavy oil consumption... i would be happy to provide a walkthrough for you if you like...
couple things to remember if doing it... 1) leave it sit... it does no good to just run it through the system.. it needs time to 'eat' away at the build up... i leave mine in 12+ hrs (i.e. overnight and blow it out in the a.m.) and 2) change your oil within 10-20 miles of blowing it all out after letting it sit... there's the chance (depending on your wear/rings/seals/etc) that the seafoam/cleaner can seep into your oil... and you don't want that... no need to change plugs (common misconception) because at the very least, it cleans them
there really is no problem/worries with the cats... this is something actually used and recommended by dealerships as well... i do it every 6 months since my engine is known for heavy oil consumption... i would be happy to provide a walkthrough for you if you like...
couple things to remember if doing it... 1) leave it sit... it does no good to just run it through the system.. it needs time to 'eat' away at the build up... i leave mine in 12+ hrs (i.e. overnight and blow it out in the a.m.) and 2) change your oil within 10-20 miles of blowing it all out after letting it sit... there's the chance (depending on your wear/rings/seals/etc) that the seafoam/cleaner can seep into your oil... and you don't want that... no need to change plugs (common misconception) because at the very least, it cleans them

Thank You!
Since I dont have alot of mileage on the car I am going through the fuel system first!
uh.. when i use my cleaners, i only use them through the intake, NOT through my gas tank... i heard it may be okay to do so, but i don't recommend it.. use standard cleaners for that... for cleaning my injectors/etc, i use the Lucas Oil top cylinder cleaner and fuel injector cleaner (one bottle does both).... it's about $4 @ vatozone...
the seafoam & similar products are designed to sit and eat away, not be flushed and burned through a system...
the seafoam & similar products are designed to sit and eat away, not be flushed and burned through a system...
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 










The only thing I use is fuel treatments (not sea foam either). I would not add anything to the tranny or engine unless you want a messed up car.
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 










Greased lightning. Says it cleans the whole system and you only use it once a year because it's so good. Chevron with techron sucks and doesn't work.
Originally Posted by HyaBoosta
what is everyone using for fuel system cleaner? theres tons of stuff out there

Lucas Fuel Treatment lubricates rings and cylinders walls for longer life. It lubricates valves, pumps, carburators, injectors, and compression rings. It causes more combustion for more power and higher milage with fewer emmisions.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
emich
Fuel, Oil, Cleaners & Other Maintenance
9
Dec 11, 2015 12:20 PM
FistRock
Mechanical Problems/Vehicle Issues and Fix-it Forum
4
Sep 4, 2015 08:00 PM
hatch90
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
Sep 3, 2015 08:45 AM
cizsak
Mechanical Problems/Vehicle Issues and Fix-it Forum
9
Jul 21, 2015 03:39 PM







