LONDON PEEPS: General Discussion (Part II)
so are we all up for the 7thgen team in discussion at the moment. I know Big's involved but i havent seen anyone else post up as of yet. Think it could be good...definetely wouldnt mind an all 7thgen group.
Big - Let me know how the install ended up. Wish i could of stayed to hear it, i'm sure it'll sound mean. Seems like if it wasnt for your aftermarket strut bars and the unlucky situation with the mount it could of been done in 2 hours. Keep me posted
Registered!!
iTrader: (4)
Joined: Nov 2002
Posts: 1,032
Likes: 0
From: London, Ontario, Canada
Rep Power: 0 
yup.. other than what you mentioned ^^^ everything else turned out fine
it sounds nice deep/mellow
BTW.. someone left a jacket at my house.. you can pick it up whenever you want, or i'll bring it out to the next meet (next saturday)
it sounds nice deep/mellow
BTW.. someone left a jacket at my house.. you can pick it up whenever you want, or i'll bring it out to the next meet (next saturday)
Registered!!
iTrader: (31)
Joined: Feb 2002
Posts: 5,366
Likes: 0
From: Scarborough, Ontario
Rep Power: 349 
thanks for the help guys, I already threw a CEL, but thats because of the placement of the o2 sensors, so I am going to:
1. Buy Si front sway bar
2. Get motormount fixed
3. adjust o2 sensor
1. Buy Si front sway bar
2. Get motormount fixed
3. adjust o2 sensor
up-up-down-down-left-right-left-right-b-a-b-a-start
iTrader: (20)
Joined: May 2002
Posts: 7,785
Likes: 0
From: London, Ontario, Canada
Rep Power: 370 Originally posted by K Dawg ONE
Stop on over at my other club:
Toronto Protege Club--> www.toprotege.com
Feel free to ask any questions you may have!
I think their may even be a used P5 for sale too!
Stop on over at my other club:
Toronto Protege Club--> www.toprotege.com
Feel free to ask any questions you may have!
I think their may even be a used P5 for sale too!
Braden... you guys finished the install! PICS!!!!
Last edited by R1Style; Mar 22, 2004 at 12:00 PM.
Registered!!
iTrader: (4)
Joined: Nov 2002
Posts: 1,032
Likes: 0
From: London, Ontario, Canada
Rep Power: 0 Originally posted by 02civic
damn that was me......
i'll prolly pic it up tommorrow night
damn that was me......
i'll prolly pic it up tommorrow night
Originally posted by Big
thanks for the help guys, I already threw a CEL, but thats because of the placement of the o2 sensors, so I am going to:
1. Buy Si front sway bar
2. Get motormount fixed
3. adjust o2 sensor
thanks for the help guys, I already threw a CEL, but thats because of the placement of the o2 sensors, so I am going to:
1. Buy Si front sway bar
2. Get motormount fixed
3. adjust o2 sensor
4. Buy Rich one of those nice gold bolt plugs for his header
i'm looking forward to hearing it man....
Originally posted by Falcon
yeah man, come and pick it up whenever you want.. if im not home just ask my parents for it, they'll give it to you
yeah man, come and pick it up whenever you want.. if im not home just ask my parents for it, they'll give it to you
Si(R) killer # 1
iTrader: (4)
Joined: Aug 2001
Posts: 1,013
Likes: 0
From: London, Ontario, Canada
Rep Power: 0 Big, what were the problems you encountered with the install?
Did you have any clearance issues with the rear sway and the exhust?
Bruno- I haven't been out to look for belts yet. I'll keep you posted.
Did you have any clearance issues with the rear sway and the exhust?
Bruno- I haven't been out to look for belts yet. I'll keep you posted.
problems?
1) had to remove rear sway to get exhaust past it, then put sway back on.
2) progress front lower sway doesnt fit with the exhaust/cat
3) broken front motor meant had header resting on the front cross member
think thats it. Now that we've done yours mine and owens should be a piece of cake
1) had to remove rear sway to get exhaust past it, then put sway back on.
2) progress front lower sway doesnt fit with the exhaust/cat
3) broken front motor meant had header resting on the front cross member
think thats it. Now that we've done yours mine and owens should be a piece of cake
Registered!!
iTrader: (4)
Joined: Nov 2002
Posts: 1,032
Likes: 0
From: London, Ontario, Canada
Rep Power: 0 Originally posted by CoupeStylz
How did the front motor mount get broken?
How did the front motor mount get broken?
no way we could've done it pulling it off the car (then again, i did see figgs break a piece of someones tranny off once... so anything is possible)
Registered!!
iTrader: (31)
Joined: Feb 2002
Posts: 5,366
Likes: 0
From: Scarborough, Ontario
Rep Power: 349 haha, MY tranny!
Well I just got back from the dealer, here is the scoup:
1. Motor mount is replaced, NOT under warranty-----$195. This took care of the idle vibration, but the other is still there due to the piping rattling on the bottom of the floor, fitment issues that will be corrected.
2. Picked up a front sway bar and endlinks
Bar = $80
Endlinks = $26/each
3. CEL is still on, but I'll extend the sensors, and if that doesn't work I'll install the 02sim
Well I just got back from the dealer, here is the scoup:
1. Motor mount is replaced, NOT under warranty-----$195. This took care of the idle vibration, but the other is still there due to the piping rattling on the bottom of the floor, fitment issues that will be corrected.
2. Picked up a front sway bar and endlinks
Bar = $80
Endlinks = $26/each
3. CEL is still on, but I'll extend the sensors, and if that doesn't work I'll install the 02sim
wow 80 for the bar and 26 EACH for the endlinks!!!
Wont the lx/dx endlinks work on an ex bar??
Let me know cuase i've gotta go pick one up myself...for that price though i'm thinking of checking out what the wreckers got in stock in the way of 2001-03 Ex's
Wont the lx/dx endlinks work on an ex bar??
Let me know cuase i've gotta go pick one up myself...for that price though i'm thinking of checking out what the wreckers got in stock in the way of 2001-03 Ex's
