Project K20A type R HAS Begun
#62
Registered!!
iTrader: (3)
Join Date: Sep 2001
Location: IL, US
Posts: 1,160
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0
Quote
[hr]I was just wondering if you know that adding octane+ to 93 octane gas actually doesn't do anything for your octane......Anyway, I was wondering if you could take LOTS of pictures, as I am planning to do this swap also, and if it's not too much trouble, maybe a parts list?? Any little bit is appriciated!! [hr]
[hr]I was just wondering if you know that adding octane+ to 93 octane gas actually doesn't do anything for your octane......Anyway, I was wondering if you could take LOTS of pictures, as I am planning to do this swap also, and if it's not too much trouble, maybe a parts list?? Any little bit is appriciated!! [hr]
#67
Registered!!
Thread Starter
iTrader: (-1)
Join Date: Oct 2001
Location: Illinois, USA
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 well mounts should be out in the next week or so..so we'll have the subframe and the other ton of OEM parts needed for the swap delivered around the same time i think. cant wait to get the ball rolling some more
#68
Registered!!
Join Date: Oct 2001
Location: South Eastern Wisconsin
Age: 40
Posts: 874
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Here some new info for you guys. The mounts should be out in like 2-2 1/2 weeks or so once they are on sale, im ordering them and then this swap should get under way. Thats about for info but ill keep you guys posted. Later.
#69
Registered!!
Join Date: Oct 2001
Location: South Eastern Wisconsin
Age: 40
Posts: 874
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Heres some more info for you guys, the mounts wont be shipped till jan 1 [IMG]i/expressions/face-icon-small-sad.gif[/IMG], but there is some good news. Ive been thinking about it and im going to do a 5 lug 2k2 ITR brake conversion including the rear. I ordered the ITR Brembo brake conversion from jdmhondaparts and should be getting it soon. Just thought I should pass this along to you guys. Later.
#70
Registered!!
Join Date: Jun 2002
Location: Beauce, Quebec, Canada
Posts: 938
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0
Quote
[hr]Originally posted by: VeNoMsCiViC
Heres some more info for you guys, the mounts wont be shipped till jan 1 [IMG]i/expressions/face-icon-small-sad.gif[/IMG], but there is some good news. Ive been thinking about it and im going to do a 5 lug 2k2 ITR brake conversion including the rear. I ordered the ITR Brembo brake conversion from jdmhondaparts and should be getting it soon. Just thought I should pass this along to you guys. Later.[hr]
[hr]Originally posted by: VeNoMsCiViC
Heres some more info for you guys, the mounts wont be shipped till jan 1 [IMG]i/expressions/face-icon-small-sad.gif[/IMG], but there is some good news. Ive been thinking about it and im going to do a 5 lug 2k2 ITR brake conversion including the rear. I ordered the ITR Brembo brake conversion from jdmhondaparts and should be getting it soon. Just thought I should pass this along to you guys. Later.[hr]
Eric
#72
Registered!!
Join Date: Oct 2001
Location: South Eastern Wisconsin
Age: 40
Posts: 874
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 I still have to talk to briang about this, but they were able to do a 5 lug conversion on all four wheels using rsx parts, so thats what i want to do.
#74
DIY King
iTrader: (61)
Join Date: Apr 2001
Location: Shrewsbury, Massachusetts, US
Age: 47
Posts: 11,469
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 395
Quote
[hr]Originally posted by: Hawk
i will be joining you and your swap fun venom. not for at least a year, but i will.[hr]
[hr]Originally posted by: Hawk
i will be joining you and your swap fun venom. not for at least a year, but i will.[hr]
#75
Registered!!
iTrader: (1)
Join Date: Dec 2002
Location: , Minnesota, US
Age: 42
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 doing the rear disc brake conversion is actually pretty straight forward. the good news is that you shouldn't have to switch master cylinders, i'm not totally done with mine yet (cause the place i ordered the rear suspension from sent me one that has a bent spindal) but everything appears to work fine. it does just bolt right on just so you know.
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] new2.JPG (20 Kb)
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] new2.JPG (20 Kb)
#76
Registered!!
Join Date: Apr 2002
Location: Toronto, Ontario, Canada
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 whitevic ... mind give me a quick parts list? I see you have a 5 lug conversion as well, i want to keep 4 so i dont have to fiddle with the fronts.
#77
Quote
[hr]Originally posted by: Grey
Sweet! Good luck to you too Hawk! [hr]
[hr]Originally posted by: Grey
Quote
[hr]Originally posted by: Hawk
i will be joining you and your swap fun venom. not for at least a year, but i will.[hr]
[hr]Originally posted by: Hawk
i will be joining you and your swap fun venom. not for at least a year, but i will.[hr]
#78
Registered!!
iTrader: (1)
Join Date: Dec 2002
Location: , Minnesota, US
Age: 42
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 cosmicjim: you will need the rear lower control arm, upper control arm (just get a new camber piece), abs line, rubber line to caliper, emergency brake cable, and the brake assembly itself. if you use the rsx strut/spring setup the ride height will be fine, if you use what i did, using koni and ground control from the civic then connect that to the lower control arm that alone will drop your car 1 inch. to attach the emergency brake cable, you will have to take appart your console, but it just bolts right in, with no other modifications or anything.
#79
Registered!!
Join Date: Oct 2001
Location: South Eastern Wisconsin
Age: 40
Posts: 874
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0
Quote
[hr]Originally posted by: whitevic
cosmicjim: you will need the rear lower control arm, upper control arm (just get a new camber piece), abs line, rubber line to caliper, emergency brake cable, and the brake assembly itself. if you use the rsx strut/spring setup the ride height will be fine, if you use what i did, using koni and ground control from the civic then connect that to the lower control arm that alone will drop your car 1 inch. to attach the emergency brake cable, you will have to take appart your console, but it just bolts right in, with no other modifications or anything.[hr]
[hr]Originally posted by: whitevic
cosmicjim: you will need the rear lower control arm, upper control arm (just get a new camber piece), abs line, rubber line to caliper, emergency brake cable, and the brake assembly itself. if you use the rsx strut/spring setup the ride height will be fine, if you use what i did, using koni and ground control from the civic then connect that to the lower control arm that alone will drop your car 1 inch. to attach the emergency brake cable, you will have to take appart your console, but it just bolts right in, with no other modifications or anything.[hr]
#80
Registered!!
iTrader: (1)
Join Date: Dec 2002
Location: , Minnesota, US
Age: 42
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 venomscivic: all i had to do to get them to fit with absolutely no problems was to take a 5/8 inch drill bit and drill them out. with doing that they mounted up perfectly, using the rsx bolts even. the front was more tricky to do, and took a lot more time, but was well worth it. the picture isn't that great, but if you would like i'll get you a better one, just let me know.
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] ACF95A.JPG (12 Kb)
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] ACF95A.JPG (12 Kb)
#81
Registered!!
Join Date: Oct 2001
Location: South Eastern Wisconsin
Age: 40
Posts: 874
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 I thought that I should kinda post the pics up here now since its getting close to install. I just ordered the mounts today and everything should get going after the 1st of jan. I can't wait, well here are some pics. Later.
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic001.JPG (26 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic002.JPG (27 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic003.JPG (40 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic004.JPG (45 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic005.JPG (47 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic006.JPG (28 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic007.JPG (48 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic008.JPG (26 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic009.JPG (47 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic010.JPG (44 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic011.JPG (48 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic012.JPG (28 Kb)
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic001.JPG (26 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic002.JPG (27 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic003.JPG (40 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic004.JPG (45 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic005.JPG (47 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic006.JPG (28 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic007.JPG (48 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic008.JPG (26 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic009.JPG (47 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic010.JPG (44 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic011.JPG (48 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] K20A pic012.JPG (28 Kb)
#83
Registered!!
Join Date: Oct 2002
Location: TORONTO & AKRON, Ontario, Canada
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 GOOD JOB!!!
hey how much did u pay for the K20?
I am wanting one so badly, where can i get one,
and how much,
will they fit in the 2001 civic coupe LX?
how much does is it to install?
hey how much did u pay for the K20?
I am wanting one so badly, where can i get one,
and how much,
will they fit in the 2001 civic coupe LX?
how much does is it to install?
#84
Quote
[hr]Originally posted by: CIVIC2NV
GOOD JOB!!!
hey how much did u pay for the K20?
I am wanting one so badly, where can i get one,
and how much,
will they fit in the 2001 civic coupe LX?
how much does is it to install?[hr]
[hr]Originally posted by: CIVIC2NV
GOOD JOB!!!
hey how much did u pay for the K20?
I am wanting one so badly, where can i get one,
and how much,
will they fit in the 2001 civic coupe LX?
how much does is it to install?[hr]
Search for k20, you'll find all the info you need
#85
Registered!!
iTrader: (1)
Join Date: Aug 2001
Location: St.Louis
Posts: 1,324
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 ABuddy of mine just ordered his K20 type R yesterday, he paid 6200 for everything. His car will be back in March its getting sent out tommorow. They just stripped everything off the car. He has lots of stuff for sale btw, his car is red. Its geting stripped because he is getting Meredes Benz S type conversion headlights and tailights, getting candy apple red paint and widebodied. Its going to be raw. And his car is on 19's
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
ricer_em2
Mechanical Problems/Vehicle Issues and Fix-it Forum
2
05-11-2016 08:09 PM