For Sale in MA or Surrounding Area
Thread Starter
Support your local 81
iTrader: (1)
Joined: Nov 2001
Posts: 1,310
Likes: 0
From: In the land of milk and butter, Massachusetts, US
Rep Power: 0 
For Sale in MA or Surrounding Area
Due to some finincial problems I am looking to sell my subs/box/amp for $350 dollars or best offer. Here is the information. If you need to contact me for more information, please e-mail erik_maloney@hotmail.com Thanks! BTW subs are less then a year old, no problems with them, they kick ***. Amp is less then 2 months old, with a best buy 3 year warrently. Box is the same age as the amp.
2 Image Dynamic 12” IDQ12 D2 V.2
Subwoofers in a sealed box and a Sony Explode XM-2150GSX Amplifier
Subwoofer Specs: Retail Value Per Sub: $199.00
Model: IDQ12 D2 v.2
Size: 12"
RMS/Peak Power: 350/700W
Voice Coil: Dual 4 Ohms
Xmax: 11.5mm
Sealed Enclosure: 0.85 cu.ft
Ported Enclosure: 1.5 cu.ft
Fq Response: 10 – 150hz
Sensitivity: 90db
Amplifier Specs: Retail Value: $199.00
760 Watts Max Power (into 2 ohms)
150 Watts x 2 into 4 Ohms, 20-20 kHz at 0.04% THD
380 Watts x 1 into 4 Ohms, 0.1% THD
Variable Lo-Pass/Hi-Pass filters (50-300 Hz)
Low Boost 0 - 10 dB at 40 Hz
High current MOSFET power supply
MOSFET output stage
Aluminum die-cast heat sink
One-sided terminal layout
Line-level and speaker level inputs
Dual mode capability
Gold-plated recessed connectors
Through outputs
2 Image Dynamic 12” IDQ12 D2 V.2
Subwoofers in a sealed box and a Sony Explode XM-2150GSX Amplifier
Subwoofer Specs: Retail Value Per Sub: $199.00
Model: IDQ12 D2 v.2
Size: 12"
RMS/Peak Power: 350/700W
Voice Coil: Dual 4 Ohms
Xmax: 11.5mm
Sealed Enclosure: 0.85 cu.ft
Ported Enclosure: 1.5 cu.ft
Fq Response: 10 – 150hz
Sensitivity: 90db
Amplifier Specs: Retail Value: $199.00
760 Watts Max Power (into 2 ohms)
150 Watts x 2 into 4 Ohms, 20-20 kHz at 0.04% THD
380 Watts x 1 into 4 Ohms, 0.1% THD
Variable Lo-Pass/Hi-Pass filters (50-300 Hz)
Low Boost 0 - 10 dB at 40 Hz
High current MOSFET power supply
MOSFET output stage
Aluminum die-cast heat sink
One-sided terminal layout
Line-level and speaker level inputs
Dual mode capability
Gold-plated recessed connectors
Through outputs
Thread Starter
Support your local 81
iTrader: (1)
Joined: Nov 2001
Posts: 1,310
Likes: 0
From: In the land of milk and butter, Massachusetts, US
Rep Power: 0 
<< I replied to the other thread too, how much for the whole system? >>
$350. If you are not too far from springfield MA i will bring it to you too [IMG]i/expressions/face-icon-small-smile.gif[/IMG]
Thread Starter
Support your local 81
iTrader: (1)
Joined: Nov 2001
Posts: 1,310
Likes: 0
From: In the land of milk and butter, Massachusetts, US
Rep Power: 0 
<< I replied to the other thread too, how much for the whole system? >>
btw ill keep it hooked up in the car so you can hear it....
Retired Super Mod and STILL Pimpin' Yo Mama
iTrader: (4)
Joined: Jun 2001
Posts: 8,267
Likes: 0
From: My Crib, FL
Rep Power: 387 









That's a deal, I'm not too familiar with Springfield, MA... I work in Marlboro, MA, according to MapQuest, it's like 60 mi from you to my work, pending on what part of Springfield you are in.. I wouldn't mind driving up though.. Say Friday, if you're not busy.
Thread Starter
Support your local 81
iTrader: (1)
Joined: Nov 2001
Posts: 1,310
Likes: 0
From: In the land of milk and butter, Massachusetts, US
Rep Power: 0 
<< That's a deal, I'm not too familiar with Springfield, MA... I work in Marlboro, MA, according to MapQuest, it's like 60 mi from you to my work, pending on what part of Springfield you are in.. I wouldn't mind driving up though.. Say Friday, if you're not busy. >>
Whats a mall that is in between springfield and marlbro? We can prolly meet there. I get out of work at 5:30 on friday.
Thread Starter
Support your local 81
iTrader: (1)
Joined: Nov 2001
Posts: 1,310
Likes: 0
From: In the land of milk and butter, Massachusetts, US
Rep Power: 0 
<<
<< That's a deal, I'm not too familiar with Springfield, MA... I work in Marlboro, MA, according to MapQuest, it's like 60 mi from you to my work, pending on what part of Springfield you are in.. I wouldn't mind driving up though.. Say Friday, if you're not busy. >>
Whats a mall that is in between springfield and marlbro? We can prolly meet there. I get out of work at 5:30 on friday. >>
Actually, how close are you to the auburn mall? That is not too far from me.
Thread Starter
Support your local 81
iTrader: (1)
Joined: Nov 2001
Posts: 1,310
Likes: 0
From: In the land of milk and butter, Massachusetts, US
Rep Power: 0 
<< Auburn Mall, I'm probably about 35-40mins from there, that would work great.... >>
That would work perfect. Here e-mail me at
erik_maloney@hotmail.com
so we can discuss in more detail.
Thread Starter
Support your local 81
iTrader: (1)
Joined: Nov 2001
Posts: 1,310
Likes: 0
From: In the land of milk and butter, Massachusetts, US
Rep Power: 0 
<<
<< Malboro is not 35-40 mins. from the auburn mall... try 20 mins down RTE. 290 >>
Doesn't matter anyways, I'll be coming from home... >>
sup man, cool meeting you tonight. BTW I have to say again, I like your car. Nice and clean looking. Maybe we will meet again at a 7th gen meet. PS, sorry about the stench from the car [IMG]i/expressions/face-icon-small-wink.gif[/IMG] Enjoy the subs. hehe it was odd not having them on while I was driving.
Retired Super Mod and STILL Pimpin' Yo Mama
iTrader: (4)
Joined: Jun 2001
Posts: 8,267
Likes: 0
From: My Crib, FL
Rep Power: 387 









<< sup man, cool meeting you tonight. BTW I have to say again, I like your car. Nice and clean looking. Maybe we will meet again at a 7th gen meet. PS, sorry about the stench from the car Enjoy the subs. hehe it was odd not having them on while I was driving. >>
It was good meeting a new face, they sounded good. I can't believe they are underpowered
I'm planning on going to the South Jersey Meet, so maybe I'll see you there.. You can hear my "new" subs
Thread Starter
Support your local 81
iTrader: (1)
Joined: Nov 2001
Posts: 1,310
Likes: 0
From: In the land of milk and butter, Massachusetts, US
Rep Power: 0 
<<
<< sup man, cool meeting you tonight. BTW I have to say again, I like your car. Nice and clean looking. Maybe we will meet again at a 7th gen meet. PS, sorry about the stench from the car Enjoy the subs. hehe it was odd not having them on while I was driving. >>
It was good meeting a new face, they sounded good. I can't believe they are underpowered
I'm planning on going to the South Jersey Meet, so maybe I'll see you there.. You can hear my "new" subs
heheh yeah, those bastards hit hard. When is that meet? and Where in nj is it? I am interested in going, and if it is on the weekend, I will be there [IMG]i/expressions/face-icon-small-smile.gif[/IMG] Sometime next week I am getting my rims re-done. I cant wait. The clear coat is comming off of them. So they look boo [IMG]i/expressions/face-icon-small-smile.gif[/IMG] BTW I have the subs tuned very well to the amp, so I wouldnt change the setting too much. hehe
Retired Super Mod and STILL Pimpin' Yo Mama
iTrader: (4)
Joined: Jun 2001
Posts: 8,267
Likes: 0
From: My Crib, FL
Rep Power: 387 









The Jersey meet is on June 8th.. I posted a thread on it: Jersey Meet in NE Forum
Main Thread in Gen Ram
Main Thread in Gen Ram
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
nirvanaguy
Mechanical Problems/Vehicle Issues and Fix-it Forum
25
Oct 26, 2017 07:26 PM
Wankenstein
Mechanical Problems/Vehicle Issues and Fix-it Forum
11
Sep 27, 2015 11:33 AM
Balkos
Archive - Parts for Sale
2
Sep 11, 2015 11:39 PM




