Rep Power: 0

I have a 1995 honda civic dx sedan, and im looking for a vtec engine to replace with my current engine. What are the kinds of vtec engines that fit my current engine mounts? If there isnt any, what do i have to do to fit other vtec motors in my car?
Also, if i wanted to step up to a B series engine, which engine can i use and what will i have to do to install that?
My current engine should be a d15b7.

 
Rep Power: 0

im pretty sure you can just get a d series v tec head. i think it just bolts on ... and then you need the v tec ecu ? and i THINK the v tech dizzy. but ! im new to all this honda stuff so hopfully somone with more experiance will step in and correct me if im wrong before to long.

 
Rep Power: 0

u also could just get the whole vtec ecu. a z6 or y8 head will fit right on. and until u get the ecu changed will just run like normal with a bit more power due to the bigger ports on the head. after the vtec ecu is installed there u go. u also have 2 have a pressure activated switch for the vtec. any d series with the exception of a zc motor will fit right in to ur car. a b series mounts r different. i fabed my own on my buddys car wasnt that hard. but ive been doing this for my whole life with chevys so xD. the tranny will need different mounts also if memory serves and, the linkage with ur trans will need to b changed

 
Rep Power: 0

I also have the same motor but my civic is a coupe i wanna know what i could do for the v tech swap as well my car needs a new engine anyways