looking to turbo a 98 Si SOHC. need help
looking to turbo a 98 Si SOHC. need help
i've never turboed a honda before so i had some questions. where are the good spots for oil lines (my preference is to get the adapter for oil filter with bungs for pressure sender and turbo feed) what are appropriate injectors for a t3/t4 on the D16y8 running 8-10psi max. and finally how hard is it to install and tune the hondata s300? more questions to follow Live for the Twisties
Administrator
Joined: Jun 2010
Posts: 8,580
Likes: 5
From: Langley, BC
Rep Power: 285 










Re: looking to turbo a 98 Si SOHC. need help
The adapter sandwich plate that goes by the oil filter.
You'll be fine using 450cc injectors.
Installing s300 is simple, but tuning isn't, it takes a lot of talent and a very strong knowledge base. A bad tune will destroy an engine. It's best to have a shop specializing in Hondas do the tune, which will probably cost between $300-500.
You'll be fine using 450cc injectors.
Installing s300 is simple, but tuning isn't, it takes a lot of talent and a very strong knowledge base. A bad tune will destroy an engine. It's best to have a shop specializing in Hondas do the tune, which will probably cost between $300-500.
Re: looking to turbo a 98 Si SOHC. need help
The adapter sandwich plate that goes by the oil filter.
You'll be fine using 450cc injectors.
Installing s300 is simple, but tuning isn't, it takes a lot of talent and a very strong knowledge base. A bad tune will destroy an engine. It's best to have a shop specializing in Hondas do the tune, which will probably cost between $300-500.
You'll be fine using 450cc injectors.
Installing s300 is simple, but tuning isn't, it takes a lot of talent and a very strong knowledge base. A bad tune will destroy an engine. It's best to have a shop specializing in Hondas do the tune, which will probably cost between $300-500.
closest pro honda shop is probably about 1000 miles away so it will be DIY. any suggestions for base tune values? Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Jaryn
Engine Performance Modifications
9
May 17, 2016 02:52 AM





