Rep Power: 0

would you use a lisence plate frame under a seat or a straight tube to give light to your car

 
Rep Power: 329

tubes. i have 6 inch and they work great. also, you can use whatever you want really, a friend of mine has strobes in his, and they work well too. i suppose the license plate frame would work fine, but i wouldn't think they would put off as much light and concentrate it to a certain spot as well...

 
Rep Power: 338

we put turn signal bulbs under the seats of my buddies 4 runner, they look awesome.

you dont have to spend $20 for stuff thatll cost you $3.50 at kragen!

 
Rep Power: 0

Rabbit don't the turn signal bulbs get pretty hot tho? I would be afraid that something would get under the seat and it melt or burn.

 
Rep Power: 338

not if you install it so the bulb is not resting on the carpet.

 
Rep Power: 402

it all depends on how many people sit in your back seat. do lots of people sit back there that you want to impress? then i would go with a LP frame, it would put out glow out all 4 corner but would cost more. only want to show off to people who sit shotgun? then go with a 15" tube. i used zip ties for mouting mine along the bar you use to scoot the seat back and fourth. i also have 2 under the dash, 2 in the side air vents and just put 2 in the middle vents of the dash. i also plan on putting a couple headlight strobes in the 2 middle vents. neon gets addicting, just pick good colors.

 
Rep Power: 338

our turn signal bulb lights up the entire floor area on each side of the vehicle.