Rep Power: 0

where is that ground that you use? do u have to take out the back seat?

 
Rep Power: 0

You have to remove the rear seat that yer butts on.. you can push the padding down and use a 4" Extension and a wrathet to get the bolt off.. that's the bolt [IMG]i/expressions/face-icon-small-smile.gif[/IMG].

CHeers
Mohawk

 
Rep Power: 0

ok i got it. so the bolt that i remove is the one that i use right? if it is do i have to sand the paint off?

 
Rep Power: 0

Yeah..you have to remove that bolt by pushing the padding down in the back..wher eit meets the backrests..use te 4" Ratched extension and 12mm socket and take out the bolt amigo..

 
Rep Power: 0

i got it off now but i can't seem to put the bolt back on. when screwing the bolt on it gets to a piont where it gets really hard to screw it. it is in a bit but gets hard to screw. the bolt is not in all the way yet as the seat could still be moved. i don't know what i did wrong.

 
Rep Power: 0

You Crossed threads on the bolt and possibly stripped or mangled the first few threads..[IMG]i/expressions/face-icon-small-smile.gif[/IMG]

 
Rep Power: 0

i guess i'll leave it and find another ground. where should i put this ground at?