Rep Power: 0

wassup,

i have a 05 civic special edition.... and im gonna get a decent system, heres a pic of it



so my question is what kind of wiring would i need for all of this???

heres the specs:
* AMPLIFIER
o 400 X 1 WATTS RMS
o Brushed Aluminum Chassis
o Top Mount Controls with Blue Illumination
o Cooling Fan
o Chrome Dub Fan Grille
o Doublesided Glass Epoxy Circuit Board
o PWM MOSFET Power Supply
o THD: 0.02%
o S/N Ratio: 100 dB
o Frequency Response: 10Hz - 40kHz
o Variable 18 dB Hi-Pass Crossover: 75Hz - 750kHz
o Variable 18 dB Lo-Pass Crossover: 50Hz - 150Hz
o Selectable Bass EQ
o 4-Way Protection Circuitry: Thermal, Short Circuit, DC Offset, and Overload

* 10" SUBWOOFER
o Oversized 30 oz Double-Stacked Strontium Magnet
o Power Handling: 200 Watts RMS
o Frequency Response: 24Hz - 1kHz
o Efficiency: 87 dB
o 1.5" Foam Surround
o No-Press Pulp Cone
o 1.5" 4-Layer ASV Voice Coil

 
Rep Power: 0

400rms, eh? If I were to put those in my car, Well, I would go with an 8 or 16 guage wiring kit that goes from the battery to the amp. If a professional were to install it, it would be about 75 bucks for wiring as well. You are going to need RCAs as well, that go from the deck to the amp. These run for about 35 dollars and can be installed professionally. If the deck is stock, you will need to do it a different way, I am not sure how because most stock decks do not have RCA outputs. Hope that helps
Rob

 
Rep Power: 0

oh yeah, you will need to bridge the amp as well bc you have a mono amp and two subs, this will also maximize power, so get some speaker wire too.

 
Rep Power: 0

yeaa circuit city said around 150 to install it, but thats without wiring. soo i just wondering

 
Rep Power: 360

son of a bitch you made 3 of these threds?

 
Rep Power: 276

hahahaha