Rep Power: 318

Sup guys...herez my problem...i have 2 amps...a 4-ch Inifinity and a Hifonics Titan for my Subs...I got it all wired the other day and when I go to power it all on, the Inifinity amp doesn't get any power to it. The funny thing is that the Power light doesn't come on, but the amp starts to get warm. I've disconnected, reconnected and still have this problem. BTW, I don't have a distribution block. I had the MAIN power wire to my cap, and from my cap I had both the amps wired. Am I missing something here? I looked online and came up with nothing.

So in short, my Infinity amp is not turning on. Any suggestions? I need help man!

 
Rep Power: 0

swap out another amp and test it. Or if you have access to a DMM, check the voltage on the power terminals and signal cables. If everythings within range, its an internal problem

 
Rep Power: 328

check your remote wire

 
Rep Power: 322

are your grounds solid?

 
Rep Power: 786

change the thread title to something more descriptive please, as per forum rules

and make sure the amp is not protecting.