zackde

guys,

any bad effect if ill mount my amp on the top of my SUB box enclosure?

thanx

diskreet

iTrader: (1)

if its a cheap amp it might shake the control ***** thats about it. Or if really cheap it might break it.
you could always do this:


just zip-tie and screw in (the top) a piece of thin wood against the back of the seat...pull the cloth cover over and screw on the amp. Much cleaner and nicer if you ask me. not nearly as messy!

zackde

thanx, i will do that

diskreet

iTrader: (1)

sure here is high res pic of what i am talking about:



If this helps please give me rep! I need it!

To get the fabric up like that just unzip both sides, on the very bottom there is also a plastic thing that i cannot describe but its not tight + doesnt hold too well, just try to tuck that in before zipping back up when finished and it will sit and zip better since its stretched flat. If you do not understand this part just go check out the seat back and see what I mean!