--FS: koni yellows for RSX/EP3/03-05 civic
Thread Starter
Registered!!
iTrader: (7)
Joined: Jul 2006
Posts: 811
Likes: 0
From: Columbus, Ohio
Rep Power: 250 
--FS: koni yellows for RSX/EP3/03-05 civic
okay, don't get TOO excited. here's the scoop:
4 koni yellows, quite a few miles but i honestly have no idea how many are on them. the rears still have good rebound and are fine minus the super shitty paint i just threw over them so they didn't look like absolute ****, but just a little like ****.
the front drivers strut is pretty much blown, passenger side still rebounds. these were on my 01 civic. for the front, the koni's are inserts so you have to hack up the stock strut housing and bolt them in, as seen in the pics. since i have RSX brakes and knuckles, the struts had to be drilled out so they will only bolt up to RSX and 03-05 civic knuckles since they use the same size. EP3s and RSXs use the same suspension i'm pretty sure, a quick search on HT will yield any differences in model years or whatever. if you were to use these on an RSX, you would either need to drill the hole out for the tierod end since RSX tierod ends are larger OR get civic tierod ends. the rears will bolt straight up to an RSX, but will require modification of the lower mounting point for a civic since the mounting point on RSX struts is a tad bit wider. the fronts will bolt straight up to an 03-05 civic.
i'm setting the price at $100 obo for all four, or i'd trade for any neat k-series parts (fuel rails, intake, hondata IM gasket) or really any cool trades you can throw up. i need speakers for my DD so that's an option, haha. these could be a good candidate for a rebuild or whatever you want to do. there are authorized koni rebuilders all over the place and they could build them to your specifications. honestly you could probably just replace the drivers side strut and be fine. i'm not trying to hustle or anything, i know these don't look the best and i'm being honest about them. they're around 180 each brand new to give you an idea of price.
and now after this novel, some pics:
and there they are. shipping can be discussed via PM with any potential buyers. also, for 20 bucks more i can sandblast them and take the time to give them a decent paint job with whatever color you want. PM me with any interest, i never really browse the site aside from the links on the front page.
4 koni yellows, quite a few miles but i honestly have no idea how many are on them. the rears still have good rebound and are fine minus the super shitty paint i just threw over them so they didn't look like absolute ****, but just a little like ****.
the front drivers strut is pretty much blown, passenger side still rebounds. these were on my 01 civic. for the front, the koni's are inserts so you have to hack up the stock strut housing and bolt them in, as seen in the pics. since i have RSX brakes and knuckles, the struts had to be drilled out so they will only bolt up to RSX and 03-05 civic knuckles since they use the same size. EP3s and RSXs use the same suspension i'm pretty sure, a quick search on HT will yield any differences in model years or whatever. if you were to use these on an RSX, you would either need to drill the hole out for the tierod end since RSX tierod ends are larger OR get civic tierod ends. the rears will bolt straight up to an RSX, but will require modification of the lower mounting point for a civic since the mounting point on RSX struts is a tad bit wider. the fronts will bolt straight up to an 03-05 civic.
i'm setting the price at $100 obo for all four, or i'd trade for any neat k-series parts (fuel rails, intake, hondata IM gasket) or really any cool trades you can throw up. i need speakers for my DD so that's an option, haha. these could be a good candidate for a rebuild or whatever you want to do. there are authorized koni rebuilders all over the place and they could build them to your specifications. honestly you could probably just replace the drivers side strut and be fine. i'm not trying to hustle or anything, i know these don't look the best and i'm being honest about them. they're around 180 each brand new to give you an idea of price.
and now after this novel, some pics:
and there they are. shipping can be discussed via PM with any potential buyers. also, for 20 bucks more i can sandblast them and take the time to give them a decent paint job with whatever color you want. PM me with any interest, i never really browse the site aside from the links on the front page.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Default_Slayer
Electrical DIY
10
Dec 4, 2022 07:56 AM
usajags84
6th Generation Civic 1996 - 2000
15
Aug 19, 2015 03:12 AM
