F.S. CROWER R&D Engine
Subarus FTW I do NOT miss my civic
iTrader: (9)
Joined: Jul 2004
Posts: 4,595
Likes: 0
From: Scottsdale, AZ
Rep Power: 0 
yeah, you better buy it quick. Everybodys gonna be getting a gangload of money veeery soon. Tax time. I am buying a turbo possibly soon, lots of others will be spending as well. BUY IT!
Thread Starter
Registered!!
iTrader: (2)
Joined: Jan 2004
Posts: 480
Likes: 0
From: Caribbean
Rep Power: 0 Read the following post and then you'll know the specs....
http://www.7thgencivic.com/forums/sh...6&page=1&pp=15
http://www.7thgencivic.com/forums/sh...6&page=1&pp=15
have you gotten a dyno yet? and full details on what is done to the motor? also, in the post either you or Eddie posted that parts on the engine will be "like" the productions parts to be released by Crower down the road... so they will leave the prototype parts on the engine upon completion? also, will they provide any type of warranty for their work since these aren't technically production parts?
sorry for all the questions, but definitely something i'd want to know before $200 leaves my hand.
sorry for all the questions, but definitely something i'd want to know before $200 leaves my hand.
Thread Starter
Registered!!
iTrader: (2)
Joined: Jan 2004
Posts: 480
Likes: 0
From: Caribbean
Rep Power: 0
Originally Posted by teampointless
sorry for all the questions, but definitely something i'd want to know before $200 leaves my hand.
I was asking for $2000, and the parts that will be in the engine is the exact parts that Crower will be selling to the public. The warrenty will be the same as if you were to buy the parts from crower themselves. If some thing goes wrong with the cam or other parts, then the next step will be to contact crower about this problem.
Beside all the parts (spring, retainers, valves, cam gear) are the same from the older model civic. The only new parts are the rods, cams, pistons.
The only problem now would be to disable the rev limiter in our ECU because the RPM range would be increased to about 8000+ RPM
Thread Starter
Registered!!
iTrader: (2)
Joined: Jan 2004
Posts: 480
Likes: 0
From: Caribbean
Rep Power: 0 Oh BTW crower will be posting dyno results with only the cams installed (no high or low compression). It will be stock comression (9.9:1) because they are only gonna show the HP gain with the cams alone over a stock motor. So the actual horsepower with everything installed would not be known until you install the engine and dyno it yourself.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
