FS: parting out car, lots of stuff!!!
SubscribeAs the title says, Im parting out the car and have lots of stuff to get rid of, so here goes:
17" Enkei RS5 with tires. Bought brand new over the summer, both have approximately 7000 miles. Tread is still great and rims are near flawless. One wheel has a scrape on the lip, very minor. If youve ever shipped wheels, you know its around $100, so if youre local come get em, if not i will ship, but be prepared for shipping charges. All centercaps included. $650 OBO
Wings West Avenger body kit. This is a real Wings West kit, urethane, not fiberglass. Painted NHBP. The kit fits pretty close to OEM, as you can see in my gallery. Rear and sides are perfect. The front has your normal small chips for daily driving. There is also about a silver dollar sized scrape on the passengers side front bumper, just under the headlight where someone hit me in a parking lot. Very minimal and could probably be touced up via DIY. I paid $1315 shipped from Wings West, would let it go for $700 OBO + shipping.
ViS Invader Carbon Fiber hood. This can also be seen in my gallery. Hood is in great shape, a few minor dings from rocks and such. I was very surprised at how well this fit, very very close to OEM. It is guenuine ViS, so no worries about that. I would like to get around $300 + shipping for this.
I have several more items that will be for sale shortly, these item include the following:
AutoMeter triple pillar gauge pod for coupes only. Currently painted blue, but you can sand and repaint any color you want. Will ask $40 shipped for it.
PowerTech axleback exhaust system. Ive had this exhaust for a little over a year and must say Im extremely impressed with the quality. The sound is amazing too. Just deep enough, and not loud or raspy at all. N1 style tip. Aksing $75 shipped.
DC Header, top section only. Honestly, this is barely bigger than the stock manifold. CARB legal though if it matter to you. Its ceramic coated, and a fairly easy install. Asking $100 shipped.
AEM Intake, blue in color. This intake has been drilled and tapped for use with nitrous, so if youre planning on spraying, buy this at a discounted price, rather than buying a new one and drilling into it. Asking $50 shipped.
Finally, Im not sure if Im going to sell my nitrous setup, might use it on my new car, but not sure. If I do, the following would be included. Zex wet system... I love this setup, Ive had 0 problems and have sprayed a 75 shot on the vic for 3 bottles, no problems. Also included is a Zex purge kit and CompuCar bottle warmer. Id like to get around $550 shipped for the entire package, but as I said Im not 100% on selling this yet, just checking interest.
If you have any questions drop me a PM. Thanks.
-Joey
17" Enkei RS5 with tires. Bought brand new over the summer, both have approximately 7000 miles. Tread is still great and rims are near flawless. One wheel has a scrape on the lip, very minor. If youve ever shipped wheels, you know its around $100, so if youre local come get em, if not i will ship, but be prepared for shipping charges. All centercaps included. $650 OBO
Wings West Avenger body kit. This is a real Wings West kit, urethane, not fiberglass. Painted NHBP. The kit fits pretty close to OEM, as you can see in my gallery. Rear and sides are perfect. The front has your normal small chips for daily driving. There is also about a silver dollar sized scrape on the passengers side front bumper, just under the headlight where someone hit me in a parking lot. Very minimal and could probably be touced up via DIY. I paid $1315 shipped from Wings West, would let it go for $700 OBO + shipping.
ViS Invader Carbon Fiber hood. This can also be seen in my gallery. Hood is in great shape, a few minor dings from rocks and such. I was very surprised at how well this fit, very very close to OEM. It is guenuine ViS, so no worries about that. I would like to get around $300 + shipping for this.
I have several more items that will be for sale shortly, these item include the following:
AutoMeter triple pillar gauge pod for coupes only. Currently painted blue, but you can sand and repaint any color you want. Will ask $40 shipped for it.
PowerTech axleback exhaust system. Ive had this exhaust for a little over a year and must say Im extremely impressed with the quality. The sound is amazing too. Just deep enough, and not loud or raspy at all. N1 style tip. Aksing $75 shipped.
DC Header, top section only. Honestly, this is barely bigger than the stock manifold. CARB legal though if it matter to you. Its ceramic coated, and a fairly easy install. Asking $100 shipped.
AEM Intake, blue in color. This intake has been drilled and tapped for use with nitrous, so if youre planning on spraying, buy this at a discounted price, rather than buying a new one and drilling into it. Asking $50 shipped.
Finally, Im not sure if Im going to sell my nitrous setup, might use it on my new car, but not sure. If I do, the following would be included. Zex wet system... I love this setup, Ive had 0 problems and have sprayed a 75 shot on the vic for 3 bottles, no problems. Also included is a Zex purge kit and CompuCar bottle warmer. Id like to get around $550 shipped for the entire package, but as I said Im not 100% on selling this yet, just checking interest.
If you have any questions drop me a PM. Thanks.
-Joey
bump
is the axleback in good shape? do you have more pictures of it? i can see it a little bit in the "my ride" section, but it's mostly hidden
how far is kentucy from Louisiana and would you be willing to meet up half way. This is in regards for the hood?
do you have the gauges for the gauge pod??? how much for it all... all together... gauges and pod?
Quote:
Originally posted by hassoomi
is the axleback in good shape? do you have more pictures of it? i can see it a little bit in the "my ride" section, but it's mostly hidden
the system is in really good shape, no visible rust or anything. there is a small dent at the bottom of the tip but you cant see it on the car. ill try and get a better pic asap.Originally posted by hassoomi
is the axleback in good shape? do you have more pictures of it? i can see it a little bit in the "my ride" section, but it's mostly hidden
Quote:
Originally posted by Samari
how far is kentucy from Louisiana and would you be willing to meet up half way. This is in regards for the hood?
depends on what part of louisiana you live in regards to mileage. give me your zip and i can find out for sure. as far as meeting, i dont know, depends on the drive. it shouldnt cost more than $50 to ship the thing, they dont weigh anything, and im not gonna charge you insane amounts like ebay shippers do. Originally posted by Samari
how far is kentucy from Louisiana and would you be willing to meet up half way. This is in regards for the hood?
put it this way, i shipped an entire r34 fiberglass kit last year for under $60. and another little tidbit of info for everyone, when people charge you like $50 more for a residential address... its only $1 and some change extra. sad isnt it. Quote:
Originally posted by gangsta
do you have the gauges for the gauge pod??? how much for it all... all together... gauges and pod?
ill probably be keeping the gauges, as ill put them in the s2000 this spring Originally posted by gangsta
do you have the gauges for the gauge pod??? how much for it all... all together... gauges and pod?
. but for a cost break down, here goes:pod: i originally paid a little over $90 for it, as far as i know i was one of the first in the country to get one, had a dealer pick it up for me at SEMA over a year ago.
autometer nitrous gauge: 75
autometer air/fuel gauge: 65
autometer volt meter: 45
im interested in the n20 kit with purge. do you got a single purge or dual. i got a vis turbo style hood and i would like a dual purge coming out my hood.
sexy uh lol
sexy uh lolI am interested in buying if shipping for the hood is $50. I would be able to buy in January.
