Simple question about the oil dipstick
Simple question about the oil dipstick
Hey guys,
I have a '99 CX, here's my question: when you put the dipstick for the engine oil back in its "pipe", should you see the two rubber rings?? I had the oil changed the other day and it seems that the dipstick doesn't fit like it used to, and that would affect the reading by about 1/2 inch... thanks in advance!
Martin
I have a '99 CX, here's my question: when you put the dipstick for the engine oil back in its "pipe", should you see the two rubber rings?? I had the oil changed the other day and it seems that the dipstick doesn't fit like it used to, and that would affect the reading by about 1/2 inch... thanks in advance!
Martin
If you think a good mechanic is expensive, try hiring a bad one
Joined: Dec 2011
Posts: 32,017
Likes: 256
From: Midwest. Aiming about mid-chest
Rep Power: 518 










Re: Simple question about the oil dipstick
Dipstick needs to be fully seated in the tube for checking oil level.
The O rings seal the crankcase from unfiltered air, and keeps dirt out when driving.
Push it ALL the way in. Period.
Tube bent? O rings swelled? A new stick should be cheap. I show $12 retail.
The O rings seal the crankcase from unfiltered air, and keeps dirt out when driving.
Push it ALL the way in. Period.
Tube bent? O rings swelled? A new stick should be cheap. I show $12 retail.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
RIPSAW
Fuel, Oil, Cleaners & Other Maintenance
7
Nov 6, 2015 04:36 AM
GabberHead
General Automotive Discussion
19
Nov 20, 2001 07:32 PM
Ronin
General Automotive Discussion
20
Nov 17, 2001 09:46 PM





