Rep Power: 0

I have a civic with a d16y8 no vtec, and the oil pan just recently got a crack so I used jb weld on it.

That worked fantastic.
I refilled the oil.
Now it boggles all the way through when accelerating.
You can really feel it through 1000 -2000 rpm.
And also I have a really low idle.

I've been trying to diagnose it all day.

My ideas.
too much oil.
distributor cap.
02 sensor.

I already checked all the spark plugs and fuel injectors and they are working fine. I'm stuck.

 
Rep Power: 211

I'm almost afraid to ask how the welding process was done. Where was the crack on the oil pan, and how did it crack?

 
Rep Power: 811

did you wait 24 hrs for the weld to cure?

 
Rep Power: 0

Yeah the welding is fine, the oil is fine.

 
Rep Power: 313

Clean your throttle body and sensors. I don't think these two issues are related unless you let it run low on oil and damaged something internally. Zeferint JB weld isn't an actualy melting weld, it's just a product you apply to a crack that seals it up. Pretty good stuff actually

 
Rep Power: 0

Yeah that jb weld is a life saver.

Turns out the car is going into limp/safe mode because the crankshaft position sensor isn't working correctly.

Hopefully its just a wire. I'll be back in a bit to update.

 
Rep Power: 313

It's probably the sensor itself unless it's not hooked up properly