Rep Power: 284

Like xRiceboyx said, we'd all love to see it happen, its just someone coming in and making their first post about an AWD first time one off completely custom swap is something we've seen many times. Its more often a noob question than a serious question, I'd love to see a build thread though.

On a serious note, what motor are you thinking of going with?

 
Rep Power: 352

the hell with it!

let the build begin!!!

post up a lot of pixs so this thread will be 1231204818490314 pages long!

 
Rep Power: 0

I understand the initial skepticism that comes with a post like this as I've seen many of them myself just fizzle out and die after a few comments.

Motor wise, I'm sticking with the stock D16Y8 motor that came with the car (although plans for doing an all-motor build are in the pre-planning stages).

 
Rep Power: 511

You're gonna have to go with an engine equipped for awd. Even if you somehow make an awd platform work with a d16, the drivetrain losses would defeat the purpose of going to awd in the first place

 
Rep Power: 0

Not really sure why the motor would have to be equipped for AWD when there's been plenty of other motors out there (both foreign and domestics) that were not originally equipped for AWD and have it anyway.

 
Rep Power: 366

K24 in the near future?
did you get a look at the car-parts site? they have used parts from all over the country
http://www.car-part.com/

 
Rep Power: 284

I can't think of a single foreign or domestic motor not originally equipped for AWD that has it.

 
Rep Power: 511

yea.. me either.. Also, even if you could fab up something to work, I wouldn't want a D series to power an AWD drivetrain... Just sayin..

 
Rep Power: 0

Well, the motor will eventually get completely rebuilt as an all-motor beast, but for now it's just getting some minor upgrades.

 
Rep Power: 284

Good stuff.

I think what Riceboy was getting at is that your going to loose a ton of power well adding weight in the short term, but if you build the motor up big then that will probably compensate pretty well.

 
Rep Power: 366

Update:
I found one more...
Much more details now...
http://www.honda-tech.com/showthread...ight=4wd+civic
http://www.honda-tech.com/showthread...ight=4wd+civic

 
Rep Power: 284

I've actually seen it a few times now after searching for a bit, you def need to know what your doing though and have the ability to fabricate and design custom wiring harnesses. I'm going to do a k-swap awd conversion, just wait 5 or 6 years when I have time and you'll see lol

 
Rep Power: 366

yup, not something that i would tackle myself, just stumbled at it when looking for other stuff, but these ones have more details also, so i thought it would be a good incentive to OP if he still around

 
Rep Power: 284

Its the wiring thats the biggest obstacle, you need to now more than just how to move pins around to build those circuit boards.

 
Rep Power: 211

I couldn't help but burst out laughing.

 
Rep Power: 0

!UPDATE!

Still looking for a CRV donor car for this swap. Haven't been able to find any that are under $5000 or so. Once I find one, the swap will begin!

HA HA HA HA HA

sorry.

 
Rep Power: 366

did you take a look at the car-parts.com?
good to see you still there

 
Rep Power: 284

You can't buy a complete donor car off that site..

 
Rep Power: 366

oh, i was thinking he could find each part there, but maybe more expensive

 
Rep Power: 0

Ok. Here's an update for anyone still out there listening. I am currently trying to catch back up to LIFE. This build is still in the planning stages as it is something that WILL be done, just not right now. I'm still trying to locate the parts for the build, as well as the money for the parts. Eventually I will have both as well as time to do this, but for the foreseeable future, I have to put the whole build on pause. I have a family to take care of and that takes precedence over anything else.

I will try to post pics of what my car looks like in the near future.

Laterz

 
Rep Power: 366

holy C. good to see yer still trying it, then. (honestly)

 
Rep Power: 0

what year crv are you using ??

 
Rep Power: 0

Are you still thinking about sticking with the D series? Wouldn't it be much more effective to do a Wagovan RT4wd swap that mates a D vs. doing a D2B and AWD?