2006 civic lx
Re: 2006 civic lx
Instructions should be included with the kit. Here are some generic ones.
1.) Buy a spoiler.
2.) Line it up correctly onto your rear deck and mark it down.
3.) Drill 3-5 holes: 2-4 for the bolts (depending on how many), one for the wire. Don't use a bit that's too big unless you want a loose spoiler.
4.) Thread the wiring through one of the holes
5.) Bolt down the spoiler. Make sure you install the washers too.
6.) Splice the wire into the 3rd brake light (center LED) wire.
7.) Test it
8.) If everything's good, seal the bolt holes with something.
9.) Enjoy the new look
, consider getting a wash/wax because you know you need it!
1.) Buy a spoiler.
2.) Line it up correctly onto your rear deck and mark it down.
3.) Drill 3-5 holes: 2-4 for the bolts (depending on how many), one for the wire. Don't use a bit that's too big unless you want a loose spoiler.
4.) Thread the wiring through one of the holes
5.) Bolt down the spoiler. Make sure you install the washers too.
6.) Splice the wire into the 3rd brake light (center LED) wire.
7.) Test it
8.) If everything's good, seal the bolt holes with something.
9.) Enjoy the new look
, consider getting a wash/wax because you know you need it! 
Thread Starter
Registered!!
Joined: Oct 2014
Posts: 2
Likes: 0
Rep Power: 0 
Re: 2006 civic lx
Instructions should be included with the kit. Here are some generic ones.
1.) Buy a spoiler.
2.) Line it up correctly onto your rear deck and mark it down.
3.) Drill 3-5 holes: 2-4 for the bolts (depending on how many), one for the wire. Don't use a bit that's too big unless you want a loose spoiler.
4.) Thread the wiring through one of the holes
5.) Bolt down the spoiler. Make sure you install the washers too.
6.) Splice the wire into the 3rd brake light (center LED) wire.
7.) Test it
8.) If everything's good, seal the bolt holes with something.
9.) Enjoy the new look, consider getting a wash/wax because you know you need it!
1.) Buy a spoiler.
2.) Line it up correctly onto your rear deck and mark it down.
3.) Drill 3-5 holes: 2-4 for the bolts (depending on how many), one for the wire. Don't use a bit that's too big unless you want a loose spoiler.
4.) Thread the wiring through one of the holes
5.) Bolt down the spoiler. Make sure you install the washers too.
6.) Splice the wire into the 3rd brake light (center LED) wire.
7.) Test it
8.) If everything's good, seal the bolt holes with something.
9.) Enjoy the new look
, consider getting a wash/wax because you know you need it!
Re: 2006 civic lx
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Xuhme
Cracked block early R18 Overheating
21
Aug 7, 2023 03:40 PM
WeRkX
General Automotive Discussion
24
Nov 1, 2001 10:33 PM
