Rep Power: 0

I was wondering if anyone can help me out on the clearing of the stock tailights.I have seen a few people on the site do this, but I can not find any info about it(maybe it is the new layout of the site). any help would be appreciated I want to try something with them if I can clear them out

 
Rep Power: 393

I THINK I've read that there is this one guy that bought aftermarket tails...took the clear cover off and put it on the stock ones. And there you go...clear stock tails. I think that works.

 
Rep Power: 0

I looked at the stock ones and they didn't seem like they would come apart without breaking the plastic

 
Rep Power: 0

i'm guessin there is silicone around the tail lights like how there is some around the head lights. Just take a hair dryer and run it around parts of the tail, get a screwdriver and just try to pry the darn thing apart. If that doesn't work, just save up some money and buy aftermarket tails.

 
Rep Power: 0

so the guy bought new tails and just took it apart to redo the stock ones? what a waste of money.

 
Rep Power: 0

I already have aftermarket tails but wanted to try something different, without ruining the aftrmarket ones and trying something with my stock ones. Just in case it didn't work out I would still have my aftermarket ones

 
Rep Power: 413

PleasJoe is the member who cleared his stock taillights. But what I think he said he did was this.

1. Removed the red cover off the stock lights
2. Removed the clear cover off of a set of Altezza lights
3. Glued the clear cover on the the stock lights

 
Rep Power: 393

that's what i said...