dont need any parts or anything you just need to remount it with the stock screws or something if an
Thread Starter
Registered!!
Joined: Jun 2002
Posts: 111
Likes: 0
From: davie, Florida, US
Rep Power: 0 
dont need any parts or anything you just need to remount it with the stock screws or something if an
hey i was wondering i looked around is there any diy's for a flip flop trunk? because i was told you just need to remount the stock bolts or something if anyone knows how to do or has pics of this flip flop trunk let me know thanks[IMG]i/expressions/face-icon-small-smile.gif[/IMG]
Tell me what you don't like about yourself....
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (12)
Joined: Oct 2002
Posts: 12,576
Likes: 0
From: Columbia, SC, USA
Rep Power: 414 
Flip-Flop trunk Lid Instructions
----------------
Materials:
1 - 2" Window Bolt (7 screws included)
2 - 3" Lt Strap Hinges (13 screws included)
----------------
Instructions:
1. With trunk open, mark the trunk lid at the top of the stock brackets.
2. Remove your trunk lid by unbolting 4 bolts. Do not remove the stock brackets, only the trunk lid.
3. Attach the flat side of the enclosed hinge to trunk lid below the marked. With the bottom of the hinge facing down.
4. You will have to bend hinge.
5. With help reattach trunk lid to stock brackets using curved hinge. Be sure to pre-drill all holes before mounting new hinge. This hinge will create the fold down effect.
6. Connect enclosed latches about 2 inches from the bottom of the trunk lid. Be sure they are mounted on the inside of the stock brackets.
7. Mark a spot on the stock bracket to drill to allow the latches to latch. Be sure the latch will latch tightly. If it doesn't latch tightly you may have to replace the stock bottom bolts each time you want to fold down you trunk lid.
----------------
Materials:
1 - 2" Window Bolt (7 screws included)
2 - 3" Lt Strap Hinges (13 screws included)
----------------
Instructions:
1. With trunk open, mark the trunk lid at the top of the stock brackets.
2. Remove your trunk lid by unbolting 4 bolts. Do not remove the stock brackets, only the trunk lid.
3. Attach the flat side of the enclosed hinge to trunk lid below the marked. With the bottom of the hinge facing down.
4. You will have to bend hinge.
5. With help reattach trunk lid to stock brackets using curved hinge. Be sure to pre-drill all holes before mounting new hinge. This hinge will create the fold down effect.
6. Connect enclosed latches about 2 inches from the bottom of the trunk lid. Be sure they are mounted on the inside of the stock brackets.
7. Mark a spot on the stock bracket to drill to allow the latches to latch. Be sure the latch will latch tightly. If it doesn't latch tightly you may have to replace the stock bottom bolts each time you want to fold down you trunk lid.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
What_It_Do
6th Generation Civic 1996 - 2000
3
May 10, 2015 05:31 PM
cloudguy
7th Generation Civic 2001 - 2005
1
Apr 28, 2015 05:02 AM
