Rep Power: 315

Hey guys

I was wondering...I'm trying (right now) to get the black peice of trim around the instrument cluster off.

I've looked at the DIY for putting the indiglo gauges on, and he says that it's glued and clipped.

I can't seem to see the clips from underneath the steering column. I've taken off the fuse panel, and I'm going superman style upside down on the drivers seat (to see underneath the steering wheel).

Can anyone offer some help as to how to get this P.O.S. off?

Thanks!

 
Rep Power: 0

The first time you take it off, you really gotta pull.. Just put some a$$ into it! I think I might have had to use a flathead screwdriver to pry it a little bit, but be careful no to scratch anything!!!

 
Rep Power: 0

Keep pulling till you [IMG]i/expressions/moon.gif[/IMG] your pants, but yeah not too hard, just so you dont really mess anything up

 
Rep Power: 315

Thanks guys!

I just pulled like I had a pair, and it popped out!

I almost pooped my pants due to the sound it made, but its out [IMG]i/expressions/face-icon-small-smile.gif[/IMG] hehehe

Now if I could just find that post about which wire does which...

I think someone posted it a couple of days ago.

I'm installing my "Sequential Shift Light" right now [IMG]i/expressions/face-icon-small-smile.gif[/IMG]

Thanks for the help guys...if you know which wires I can theif off of to use for the power/ground/tach signal (off of the top of your head, I'll try searching now), let me know!

Thanks guys!

 
Rep Power: 0

Im not doin guages but I am replacing the clear plastic in front of the guages.
Does this jus come off when I take off the black cluster thats holding it?

 
Rep Power: 0

take the bezzel off (black cover in front of glass) Then you have to unplug and unscrew the whole gauge assembly (2 plugs, 3 screws). Take the assembly out and you'll see the tabs that hold the glass on.

 
Rep Power: 315

You'll be able to figure it out once you've taken the bezel off, and have it sitting in your lap.
--
Ok, I got the shift light installed...dayum! it's sweet!!! I'll have to make a video and post it!

I wanted to make a DIY, but my freakin digi cam ran out of batteries [IMG]i/expressions/face-icon-small-sad.gif[/IMG]

ah well.

Thanks for the help!