Rep Power: 0

hey, im swapping my auto to a manual. its a 96 civic ex. i just want to know what do i need to do the swap? im going to put the same motor but its gonna be a manual thats it.

 
Rep Power: 230

First off u need to use the search button...

 
Rep Power: 0

hahahahahahahh

 
Rep Power: 0

sitnlow97---- shutup if u not giving advise about this ok.

 
Rep Power: 236

Come on man, he's right. This is something that is pretty easy to find information on. You can't expect everything to be spoon fed to you. I'll get you started though...

You need quite a bit to do the swap, so it's not an easy 1-2-3 answer. Start with the obvious ones like the transmission, pedal assembly, center console, shift linkages...and then do some research for the specific stuff. Prepare to spend at least $600-800 (that's if you're good at finding parts for cheap!).

 
Rep Power: 236

Ugh, Double post.

 
Rep Power: 0

yea i got all that already. juz need more info cuz this gonna be my first swap that im doing.

 
Rep Power: 0

You need the tranny, ecu, slave cylinder, clutch cylinder, shift linkage, pedals, chances are if your getting used parts you might want to replace the clutch and flyweel depending on how many miles, center console setup(includes multiple things) look it up on google, alot of time and fustration with tuning and yeah....

 
Rep Power: 236

http://lmgtfy.com/?q=Civic+auto+to+manual+swap

The second link is the most detailed description you'll find I would guess...Took 30 seconds to find.

 
Rep Power: 0

Here is a accurate list of what you will need. Conversions are also easier when you have a manual motor.

http://www.hondaclub.com/forum/artic...part-list.html

 
Rep Power: 0

yea thanks dude

 
Rep Power: 0

hey on the clutch pedal. do i have to plug two wires to the two sensers on top of the clutch pedal? any info will help

 
Rep Power: 0

http://hondaswap.com/civic-del-sol-e...version-72243/

 
Rep Power: 0

thanks dude and i have another ? to ask. my old motor has a black and a green wire on the powersteering switch and my new motor has just the black wire and they cut the plug off of it. so i want to know wat do i do about this?