DIY: Gas Cap Hanger
#1
Registered!!
Thread Starter
Join Date: Feb 2001
Location: Markham, Ontario, Canada
Posts: 1,637
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 OK here it is.
Parts
- Honda Gas Cap Hanger from 2002 Civic (P/N 74423-SZ3-003)
- super sticky 2 sides tape, padded (the back surface area of the hanger is uneven)
- scisors
Instructions
- cut your padded tape to fit over the back of the hanger as shown
- if you use padded tape you don't have to worry about trimming the hanger to sit flat on the door.
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] gashanger-DIY1.JPG (18 Kb)
Parts
- Honda Gas Cap Hanger from 2002 Civic (P/N 74423-SZ3-003)
- super sticky 2 sides tape, padded (the back surface area of the hanger is uneven)
- scisors
Instructions
- cut your padded tape to fit over the back of the hanger as shown
- if you use padded tape you don't have to worry about trimming the hanger to sit flat on the door.
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] gashanger-DIY1.JPG (18 Kb)
#2
Registered!!
Thread Starter
Join Date: Feb 2001
Location: Markham, Ontario, Canada
Posts: 1,637
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 - Remove other side of tape to expose sticky tape
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] gashanger-DIY2.JPG (20 Kb)
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] gashanger-DIY2.JPG (20 Kb)
#3
Registered!!
iTrader: (1)
Join Date: May 2001
Location: Scarborough
Posts: 5,087
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 good man! you going to the bowling meet? i wanna see wtg hahaha gonna ask newkid to get em, the people at action were looking up the part number but were'nt sure.. i think they were too lazy to check hehe.. gas cap holder! dont waste my time... that's prolly what they were thinking
#4
Registered!!
Thread Starter
Join Date: Feb 2001
Location: Markham, Ontario, Canada
Posts: 1,637
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Stop PWing before I'm done [IMG]i/expressions/face-icon-small-smile.gif[/IMG]
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] gashanger-DIY3.JPG (30 Kb)
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] gashanger-DIY3.JPG (30 Kb)
#5
Registered!!
Thread Starter
Join Date: Feb 2001
Location: Markham, Ontario, Canada
Posts: 1,637
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0
#6
Registered!!
Thread Starter
Join Date: Feb 2001
Location: Markham, Ontario, Canada
Posts: 1,637
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Another angle.
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] gashanger-DIY5.JPG (31 Kb)
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] gashanger-DIY5.JPG (31 Kb)
#7
Registered!!
iTrader: (1)
Join Date: May 2001
Location: Scarborough
Posts: 5,087
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 sorry jonavin fingers were itchy...
nice job! guess your hands will be nice and warm in your pocket in the winter while ours are falling off holding that cap of ours [IMG]i/expressions/face-icon-small-tongue.gif[/IMG]
nice job! guess your hands will be nice and warm in your pocket in the winter while ours are falling off holding that cap of ours [IMG]i/expressions/face-icon-small-tongue.gif[/IMG]
#11
Registered!!
iTrader: (2)
Join Date: May 2001
Location: Saint John, New Brunswick, Canada
Posts: 2,802
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Thats a good idea, but how come our cars dont come with some sort of hanger that goes around the cap and the opening of the tank, I dont know if you know what I mean or not, but oh well.
Crashoveride
Crashoveride
#15
Registered!!
Thread Starter
Join Date: Feb 2001
Location: Markham, Ontario, Canada
Posts: 1,637
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 The stock 2002 one probably has proper mounting on the door. You can always get the whole door...
That'll probably be $50+, judging by what other OEM parts costs.
That'll probably be $50+, judging by what other OEM parts costs.
#17
Registered!!
Join Date: Sep 2001
Location: Tucson, Arizona, US
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 here is the DIY for the one they sell at Handa-accessories.
http://www.ptcruiserusa.com/hondasuv/crvix/exteriormenu/gascap/gascap.htm
BTW, i thought DIY's were for things that might be tricky. any genius who can't stick something down with tape shouldn't be driving.
http://www.ptcruiserusa.com/hondasuv/crvix/exteriormenu/gascap/gascap.htm
BTW, i thought DIY's were for things that might be tricky. any genius who can't stick something down with tape shouldn't be driving.
#18
Registered!!
Join Date: Apr 2001
Location: San Diego, California, US
Posts: 2,130
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Did you actually read what they wrote on that site about the gas cap holder?
<< It is an inexpensive addition that any owner can make to enhance the gas filling experience. >>
LOL ... I didn't know gas-filling was an "experience" that could be enhanced...
<< It is an inexpensive addition that any owner can make to enhance the gas filling experience. >>
LOL ... I didn't know gas-filling was an "experience" that could be enhanced...
#19
Registered!!
Thread Starter
Join Date: Feb 2001
Location: Markham, Ontario, Canada
Posts: 1,637
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 You're probably right, but people want to see pics anyway. Gives me a chance to make use of my new digicam [IMG]i/expressions/face-icon-small-smile.gif[/IMG]
#22
Registered!!
Join Date: Sep 2001
Location: Vernon BC Canada
Age: 42
Posts: 11,505
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 391 Hehehe... okay so see how the pieces that he attached the tape to... well, those are uneven for a reason, they tuck into metal sleeves on the door...
at least i think so... i know mine doesnt use adhesive. and it seems logical
at least i think so... i know mine doesnt use adhesive. and it seems logical
#23
Registered!!
Thread Starter
Join Date: Feb 2001
Location: Markham, Ontario, Canada
Posts: 1,637
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Of course. The only proper upgrade is to get the whole 2002 gas door. I don't really care as long as it works. Its' acttahced firmly enough that I can yank on the hanger and pull the door. That's good enough since the gas cap isn't that heavy anyways.
Yes, all this trouble. Like I said before, I'm $10 annoyed... you may not be as annoyed by the fact that there's no gas cap hanger. If you're $50 annoyed, you can get the whole door. [IMG]i/expressions/face-icon-small-smile.gif[/IMG]
How annoyed are you?
Yes, all this trouble. Like I said before, I'm $10 annoyed... you may not be as annoyed by the fact that there's no gas cap hanger. If you're $50 annoyed, you can get the whole door. [IMG]i/expressions/face-icon-small-smile.gif[/IMG]
How annoyed are you?
#27
Registered!!
Join Date: Sep 2001
Location: Tulsa
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Okay, I'll probably get flammed/banned for this but here goes:
GEEZAS F*&@ C#*$ST THAT IS THE G@YIST MOST WORTHLESS POS I HAVE EVER SEEN. IF YOU'RE TOO STUPID/LAZY/RETARDED THAT YOU NEED A HOLDER ON THE BACK OF THE GAS TANK LID TO KEEP TRACK OF YOUR GAS CAP YOU NEED TO HAVE YOUR KEYS TAKEN AWAY FROM YOU !!!!!!!!!!!!!!!!!!!![IMG]i/expressions/face-icon-small-puke.gif[/IMG][IMG]i/expressions/face-icon-small-puke.gif[/IMG][IMG]i/expressions/face-icon-small-puke.gif[/IMG]
There, I feel better, now where's my valum prescription so I can relax
GEEZAS F*&@ C#*$ST THAT IS THE G@YIST MOST WORTHLESS POS I HAVE EVER SEEN. IF YOU'RE TOO STUPID/LAZY/RETARDED THAT YOU NEED A HOLDER ON THE BACK OF THE GAS TANK LID TO KEEP TRACK OF YOUR GAS CAP YOU NEED TO HAVE YOUR KEYS TAKEN AWAY FROM YOU !!!!!!!!!!!!!!!!!!!![IMG]i/expressions/face-icon-small-puke.gif[/IMG][IMG]i/expressions/face-icon-small-puke.gif[/IMG][IMG]i/expressions/face-icon-small-puke.gif[/IMG]
There, I feel better, now where's my valum prescription so I can relax
#28
Registered!!
Join Date: Sep 2001
Location: Houston, Texas, US
Posts: 421
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 well 4 those that have BEAT....u can't use the trunk cuz the cap just rattles right off!!..+ u dont wanna put the cap on the hood cuz what faces down is simply where the GAS is ??!!
#30
Registered!!
Join Date: Sep 2001
Location: Tulsa
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 And what kind of moron puts his gas cap on his trunk or hood??? They too should have their keys taken away. Just put the cap on the gas pump (phillips 66 has big box looking pumps that have the credit card reader built into them).