Rep Power: 0

i am having a problem with the doub/sided tape holding my vafc near the outlet. i got the five pound weather proof stuff, but all week its been kinda hot here mid day (vegas) and its barely spring. the damn thing falls off after 1 hour in the sun and the unit is in the shade. doing somthing wrong? any sugg. ?

 
Rep Power: 584

are u rubbing the area u apply the tap to with alcohol, it cleans it and it sticks better

 
Rep Power: 811

Try some cement glue for a more permanent mount. It will dry overnight and be really strong.

 
Rep Power: 0

yeah i cleaned both surfaces thourghly must have got to hot at work today in the car... but if it falls off tommaroo whoogggOOOooh the boys at 3M are gonna hear about this! that shyt i just bought is rated 5 lbs. and if i cement it gear box will it come off at all later ? thanks for the help guys

 
Rep Power: 811

Yeah, if you pull hard enough, it will come off. It should be strong enough to hold it in place. Just glue it on, and tape it to the surface overnight until the glue dries completely.

 
Rep Power: 300

why do u have a vtec controller? do u have new cams?

 
Rep Power: 0

no new cams and its for fuel maping... vtec kicks hard too when set in optimum power range

 
Rep Power: 0

first off u are an idiot for buying a vafc cause i own u and i dont have one!! one horrible mod!!! LOL just put some gum on the back of it, then it will stick!!

 
Rep Power: 359

OOO. . So your fuel management kicks in right away sweet!! lol .. just messing with ya. I knew a guy with a older Vic that made his vtec button activated, so he could turn it off or on at will. . He put it where his horn button was.. Crazy stuff, probably a chaper mod too.