Rep Power: 0

ok, i got the o2 simulator from wannabfast. installed it. i turn the car to the on posistion. the CEL light goes off for about 20 seconds then turns back on.

i have the dc sport header with hks-a downpipe. i took off the wire to the o2 sensor. it has a clip about 12 in. from the o2 sensor. do i have to put that wire/clip back, and zip tie it under the car or what.

 
Rep Power: 0

Does it run good after it turns off and turns back on or what

 
Rep Power: 0

it runs fine.

 
Rep Power: 0

A. the o2 simulator is ****ed up
B. sumone put the o2 simulator on wrong
C. just leave the o2 simulator on if it runs fine after the lil turn off
D. But a Tdi Jetta
E. I take sum store points hehehe
F.hahahaha

 
Rep Power: 0

the lights turn on and off like their supposed to

well i checked and made sure i put it on right

the light wont go off.

d, e, and f are just way off topic

 
Rep Power: 0

anyone?

 
Rep Power: 0

i think you're still supposed to wrap the o2 sensor in foil or something...

 
Rep Power: 0

You really need to find the wiring diagram that hooks directly to the ECU. I tried finding it, but I had no luck...I used this method and I haven't had a problem since.

 
Rep Power: 0

Wgere did you get the simulator? Go to casperelectronics.com and they have it for like $60 or something, its already wired and has a harness that links to your stock 02 harness!!!