Angel Eye FINAL PICS (DIY soon)
Banned
iTrader: (32)
Joined: Mar 2003
Posts: 8,407
Likes: 0
From: Long Island, New York
Rep Power: 0 
look my name was used! 
while you are @ buying LEDs, you should change your dash color to blue... white, green, Red or OraNgeR ? lol... Sedans Dash is lite orange right? or yellow? CHANGE IT
while you are @ buying LEDs, you should change your dash color to blue...
white, green, Red or OraNgeR ? lol... Sedans Dash is lite orange right? or yellow? CHANGE IT 
Thread Starter
Registered!!
Joined: Sep 2003
Posts: 635
Likes: 0
From: Milford, CT
Rep Power: 0 
I said $40 cause the heat gun was $25 and the LEDs are like $4 a piece and a pack of resistors was like $3 I think then I bought a small box of conncetors and crimps for $9.
I would seriously do it if you wanted to, PM me or hit me up on AIM if you want to discuss shipping costs and such. I really wouldnt charge you a ton for my labor, lol. Maybe like at most $50 but we can discuss it depending on the shipping costs, I dont wanna rip you off if your paying out the *** for those.
P.S.- Ill be posting the DIY tonight, most likely later though but it will be up before I go to the movies to see Matrix 3.
I would seriously do it if you wanted to, PM me or hit me up on AIM if you want to discuss shipping costs and such. I really wouldnt charge you a ton for my labor, lol. Maybe like at most $50 but we can discuss it depending on the shipping costs, I dont wanna rip you off if your paying out the *** for those.
P.S.- Ill be posting the DIY tonight, most likely later though but it will be up before I go to the movies to see Matrix 3.
Ask me about your mom.
Joined: Jul 2002
Posts: 2,563
Likes: 0
From: Ottawa, Ontario, Canada
Rep Power: 316 Ok, update: I did this over the weekend. I'm still gobbing on the silicone, as they were leaking beforehand. I'm spazzing out on the glue so that they don't fog up anymore.
but, bottom line: my LEDs already had a resistor and inline reducer (can't remember the name of the component), so I measured the volts on both sides of the resistor, and it was already reducing it to 3.4V, so my 3.6V LEDs plugged in without me having to change the resistors!!!
That said, the hardest part of this all was having the patience with the heat gun to seperate the lights
hehehe
the LEDs swapped with no troubles at all!
I've gotta say, after this weekend I have a whole new respect for heat guns hehehe
they're SWEET!
but, bottom line: my LEDs already had a resistor and inline reducer (can't remember the name of the component), so I measured the volts on both sides of the resistor, and it was already reducing it to 3.4V, so my 3.6V LEDs plugged in without me having to change the resistors!!!
That said, the hardest part of this all was having the patience with the heat gun to seperate the lights
hehehethe LEDs swapped with no troubles at all!
I've gotta say, after this weekend I have a whole new respect for heat guns
hehehethey're SWEET!
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
alxz310
Mechanical Problems/Vehicle Issues and Fix-it Forum
10
Jul 30, 2015 12:18 PM
Wankenstein
Mechanical Problems/Vehicle Issues and Fix-it Forum
17
Jul 23, 2015 11:48 PM
cyc
Mechanical Problems/Vehicle Issues and Fix-it Forum
3
Jul 22, 2015 01:14 PM
Touge
Canada East
0
Jul 18, 2015 05:37 PM
Touge
Ottawa
0
Jul 18, 2015 05:35 PM
