zen_master

iTrader: (6)

guys!

suddenly, after doin a car wash in deltasonic, my right side headlight got some moist inside of it...

is it possible because i didn't properly close the plastic when i install my silverstar?

any idea how to remove the moist and to prevent that from happening again?
need help ASAP! thanx!

FALKEN

iTrader: (55)

have you had the housings opened??

Kloverz

iTrader: (1)

in order to stop that you must reseal it again with some silicone, but is it aftermarket headlights or stock, but what i did was i use black electric tape, and i tape up all the part that was opening due to TYC shitty job a seal it. its better than silcone more clean. if its ur stock i say take it in for a warranty and see what they say. eventually it will dry up but with water marks,

zen_master

iTrader: (6)

thanx for the infos, guys!

i got a stock headlight....i'm afraid that the moist happened because i didn't properly close the weather seal when i installed my sylvania ST...

the moist's gone after i drove my car for hours with my lights on....well, in the night...of coarse... i think i will re-check everything again...

the problem only occured on the right headlight....i think i re-check the left headlight so many times because it's pretty hard to close it on that side due to the oil bottle..

edit:: do u think they will be happy to fix the headlight after i changed the bulb?

anyway, originally, the problem occured after doing a carwash in deltasonic...i assume..