When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The seal was bad and I was loosing air. The nut was stuck and the sensor broke unscrewing it.
Drill a hole through the sensor. Make a thread according to the bolt you have. Cut a channel on the bolt for the air. At the end use epoxy without covering the air hole (toothpick in the hole prior applying the epoxy works great).
I didn't replace the battery It was at %85 capacity after 6 years.
