Rep Power: 0

I was under the impression that we had 6.5s in the doors and when igot the ones i ordered and took out the facotry ones the hole was waaaayyyyy too small and i could barely get the magnet it and still not al the way. I ordered the speaker adapter plates from crutchfield (http://www.crutchfield.com/S-eDGOzOk...3200&I=142SAH6). Will those take care of my problem or do i need to do anything else??

 
Rep Power: 243

broken link..

 
Rep Power: 0

Fixed

 
Rep Power: 315

Thats what you need

 
Rep Power: 0

I had to make my holes bigger. Increased my diameter by .5 in addition to the one inch spacer.

 
Rep Power: 315

Just spacers did iy for me.

 
Rep Power: 0

MOMO's magnets are as big as the speaker. Just about at least. What kinda speakers did you get?

 
Rep Power: 812

i used a 1 inch spacer from circuit city for my infinity 6.5

 
Rep Power: 0

I got ma audio hk65

 
Rep Power: 0

You should be good with just the spacer. Gearbox, you get components or coaxials?

 
Rep Power: 812

coax running off amp, and separate tweeters off deck power. very good combo. and i have the door speaker tweeters aimed down.

 
Rep Power: 0

i may have to give that a shot, are the tweeters you have loud enough to match the output of your amp'd speakers?

 
Rep Power: 281

i used the spacers and grinded down the plastic on the inside of the door panels with a dremel for added clearance.

 
Rep Power: 812

um yea theyre a bit too loud. i have the treble set at (-5) almost at lowest setting. im using alpine deck with upgrade power wire. the pioneer i used to have i could barely hear the tweeters. i guess alpine has better internal amp.

 
Rep Power: 311

i just made my spacers out of MDF. lol. And it works fine. Im running MB quart components Q series and they sound AWESOME!!

 
Rep Power: 299

you mean I made

 
Rep Power: 311

haha...that i had to modify i bit. lol. But yes bob, you made them.