FS: 2 Infinity Kappa Perfect 10.1
Thread Starter
250+ awhp Stage 2
iTrader: (19)
Joined: Jun 2003
Posts: 10,839
Likes: 0
From: Dallas, TX
Rep Power: 0 
FS: 2 Infinity Kappa Perfect 10.1
Got two Infinity Kappa Perfects 10.1 in a ported box with a Infinity Reference 7521a. Looking to get around $550 OBO. Used maybe a week, took out because I cannot take corners fast in my car now because it slides. Subs are perfect and they bump hard for the amp only being a 97 watt RMS x 2.
SUBWOOFER SPECS:
# 10" 4-ohm subwoofer
# aluminum cone with high-roll butyl-rubber surround
# massive cast-aluminum basket
# suitable for free-air use (handles up to 175 watts in free-air applications)
# recommended power range: 75-350 watts RMS
# peak power handling: 1,400 watts
# frequency response: 18-200 Hz
# sensitivity: 94 dB
# top mount depth: 5-3/4"
# sealed box volume: 0.6 cu. ft.
# ported box volume: 1.0 cu. ft.
AMP SPECS:
» 2-channel car amplifier
» 97 watts RMS x 2 at 4 ohms (142 watts x 2 at 2 ohms)
» 283 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode)
» variable high-/low-pass filters (32-320 Hz, 12 dB/octave)
» variable bass boost (0-12 dB at 50 Hz)
» MOSFET power supply
» CEA-2006 compliant
» Tri-way capable (Tri-Way Crossover required)
» preamp- and speaker-level inputs
» preamp outputs
» fuse rating: 30A x 1
» 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
» 12-5/16"W x 2-11/16"H x 12-1/8"D
SUBWOOFER SPECS:
# 10" 4-ohm subwoofer
# aluminum cone with high-roll butyl-rubber surround
# massive cast-aluminum basket
# suitable for free-air use (handles up to 175 watts in free-air applications)
# recommended power range: 75-350 watts RMS
# peak power handling: 1,400 watts
# frequency response: 18-200 Hz
# sensitivity: 94 dB
# top mount depth: 5-3/4"
# sealed box volume: 0.6 cu. ft.
# ported box volume: 1.0 cu. ft.
AMP SPECS:
» 2-channel car amplifier
» 97 watts RMS x 2 at 4 ohms (142 watts x 2 at 2 ohms)
» 283 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode)
» variable high-/low-pass filters (32-320 Hz, 12 dB/octave)
» variable bass boost (0-12 dB at 50 Hz)
» MOSFET power supply
» CEA-2006 compliant
» Tri-way capable (Tri-Way Crossover required)
» preamp- and speaker-level inputs
» preamp outputs
» fuse rating: 30A x 1
» 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
» 12-5/16"W x 2-11/16"H x 12-1/8"D
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
bolt-on-bandito
Electrical
32
Jan 15, 2020 03:25 PM
Munzy
7th Generation Civic 2001 - 2005
21
Oct 7, 2015 07:48 AM
