Rep Power: 0

i tried this a few times on my 2k2 coupe si and i don't know if its working or not. i move all the ***** to the left all pointing up, i press the circulate air and a/c and hold them, start engine, hold til the lights stop blinking and turns solid. i think that's how its done. then when i move the position **** to foot and windshield and move **** to on the a/c still turns on like before and i just press a/c to turn off that light. is that suppose to happen or something else? i'm lost with this diy. thanks in advance.

 
Rep Power: 0

prolly won't work on new years of our civics

 
Rep Power: 0

that happens with my 2k1. it's normal, i guess.

 
Rep Power: 420

After the DIY you should be able to turn off the AC when you have the upper most **** set all the way to the right (pointing down). The AC will still turn on by itself when you turn the **** to that position, it's just that now you'll be able to turn the AC off when in this position. Previously you couldn't.

 
Rep Power: 0

ok how does this work grey and what do you have to do, so pretty much this just lets u turn off the AC when you put on the defrost right?

 
Rep Power: 0

o man, i see now. i thought that this diy was to stop it from going on when set to that position. i was able to turn off the a/c when in that position from day one. guess i didn't even need to do this diy. i just didnt' really understand what it was doing when i did it in my car. i guess the 2k2 has the diy done at the factory.

 
Rep Power: 420

3dStylz: Check out the Mega DIY Thread for this and all of your other DIY needs.