FS: Thermal R&D Catback & Konig Heliums
FS: Thermal R&D Catback & Konig Heliums
Ok, I know I'm going to regret doing this, but I'm putting my Thermal R&D Catback for sale. Before owning this catback, I owned a GReddy EVO. I found that the R&D was actually quieter than the EVO. It has an extremely low growl, and will open up at around 1000-3900 RPMS. Once it reaches 3900, the sound of the intake will tend to take over. I found the car to be more responsive in higher rpms with this catback.
There are scratches on the stainless steel piping of the catback, and from rubbing on my sway bar, but they will not take away from the performance of this mod. I will provide pictures upon request, but I have sold a few items on this site and have vouches.
I am selling the Thermal R&D for $325, and am located in Southern California. I prefer a local buyer, but IF the buyer requests that the catback be shipped to them, all shipping expenses will be covered by the buyer.
In addition to the catback, I have a set of 15x6.5" bronze Konig Heliums for sale. These wheels weigh in at 10.8 lbs a piece! The wheels come with Falken Ziex's and have about 65-70% tread left. There is some camber wear on the wheels, but nothing major. I will let the wheels go for $400, and once again, any shipping expenses will be paid at the buyer's expense. Pictures will also be placed upon request, or can be seen through this link: http://www.honda-tech.com/zerothread?id=1260104 .
I am located in Southern California.
There are scratches on the stainless steel piping of the catback, and from rubbing on my sway bar, but they will not take away from the performance of this mod. I will provide pictures upon request, but I have sold a few items on this site and have vouches.
I am selling the Thermal R&D for $325, and am located in Southern California. I prefer a local buyer, but IF the buyer requests that the catback be shipped to them, all shipping expenses will be covered by the buyer.
In addition to the catback, I have a set of 15x6.5" bronze Konig Heliums for sale. These wheels weigh in at 10.8 lbs a piece! The wheels come with Falken Ziex's and have about 65-70% tread left. There is some camber wear on the wheels, but nothing major. I will let the wheels go for $400, and once again, any shipping expenses will be paid at the buyer's expense. Pictures will also be placed upon request, or can be seen through this link: http://www.honda-tech.com/zerothread?id=1260104 .
I am located in Southern California.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
juicetayne
Mechanical Problems/Vehicle Issues and Fix-it Forum
2
Sep 30, 2015 11:02 AM
chadds
Mechanical Problems/Vehicle Issues and Fix-it Forum
5
Sep 9, 2015 05:26 AM






