Rep Power: 0

Ok, just as the title says, I picked up a spare E-Manage and Profec E-01 to put on my current E-Manage. Now, it came with a pressure sensor for the E-Manage, and I didn't really understand it's use, because the Profec E-01 comes with one...so what's this used for?

It also came with the second harness for E-manage, but it only has two wires on the harness a Blue/White and a Blue/Black....mine on the other ahnd had a whole bunch....anyobne know why this only has two?

Also, the Profec E-01 the voltage clamp, is that of any use for our cars? Maybe a Rev-Limiter? Or maybe a higher redline?

Thanks guys!

 
Rep Power: 0

don't mean to jack your thread or anything but is there really a difference in the Profec E-01 and E-mange. For some reason I've been getting the impression the the Profec E-01 is just a emanage with the lcd screen. is that true?? or do u need to actually have the emange unit if u get the E-01??

 
Rep Power: 0

The Greddy E-01 is an Emanage Controller and Boost Controller all in one. If you have the E-01 there is no need for the support tool to connect your emanage to a laptop to be controlled.

 
Rep Power: 0

Well you bought the pressure sensor for the e-manage but since the E-01 has one, u have no use for it now, you can just sell it-...

 
Rep Power: 0

So, I can sell the extra pressure sensor? Anyone?

 
Rep Power: 0

if yor e-01 already has a boost sensor, you dont have a need for the extra one that foes to the e-manage

 
Rep Power: 0

so basically if I get the Profec E-01, then I won't have to get the emanage??? is that correct? and if so, will I need any of the extra harnesses or will the E-01 provide everything needed or be the same as getting an Emanage w/ all the harnesses??

 
Rep Power: 0

No an E-01 is not an E-manage, it is just a boost controller, but if you hook it up to an E-manage you can control it with the E-01, also you would still need the main harness form the E-Manage and the Ingnition and Injector harnesses, you not need the pressure sensor or the sensor harness or the Support tool for the E-manage if you hook the E-01 and E-manage together

 
Rep Power: 0

Anyone else wanna help out?