Remote Start with 5spd, Tach wire?
Thread Starter
Registered!!
Joined: Oct 2003
Posts: 8
Likes: 0
Rep Power: 0 
Remote Start with 5spd, Tach wire?
Hey guys that have installed remote start on a 5spd where did you tap into the tach wire? On the diagram it shows blue wire by battery which I see but its not plugged into anything. Multimeter goes up when car is started but still a weak voltage. So Im not sure.
Joined: Mar 2004
Posts: 51,077
Likes: 4
From: B.C., Canada
Rep Power: 786 
If it is easy enough, check your gauge cluster in your dash to see if you can easily distinguish that wire.
According to the DIY, there is a wire for the tach by the battery and according to how I red it, it is green with blue that needs to be exposed
Check the DIY here
http://www.7thgencivic.com/forums/sh...d.php?t=155253
and this one here
http://www.7thgencivic.com/forums/sh...d.php?t=153833
To see if you can get any useful information from there
According to the DIY, there is a wire for the tach by the battery and according to how I red it, it is green with blue that needs to be exposed
Check the DIY here
http://www.7thgencivic.com/forums/sh...d.php?t=155253
and this one here
http://www.7thgencivic.com/forums/sh...d.php?t=153833
To see if you can get any useful information from there
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Civic2002lx
Archive - Vehicles for Sale/Wanted
8
Oct 7, 2015 09:17 AM
MamaBear2015
Electrical, Wiring, and In Car Entertainment
1
May 3, 2015 02:17 PM
black2k1vtec
General Automotive Discussion
8
Dec 6, 2001 09:49 PM
loquito
General Automotive Discussion
11
Nov 12, 2001 07:24 PM
