Forget Camber-Kits! (Article I found)
Thread Starter
Just Be
iTrader: (2)
Joined: Nov 2002
Posts: 2,775
Likes: 0
From: San Fernando Valley
Rep Power: 0 
Forget Camber-Kits! (Article I found)
Monroe Launches Magic Camber
Magic Camber - an all-new product from Monroe - has been designed to correct camber problems that, to date, Monroe claims have been difficult and expensive to solve. Peter Goodrich, Product Manager for Monroe Australia, said a number of factors could adversely affect a vehicle's wheel camber.
"Driving with tired springs, lowered or raised suspension, over kerbs or fitting lower or wider profile tyres can change the camber of the wheel," said Peter.
"Not only is tyre wear increased, it is also uneven, and tyres have to be replaced more frequently. Driving on uneven tyres can also be extremely dangerous as they can make the car pull to one side and dramatically increase braking distances. Magic Camber comprises a set of two special bolts that are fast, easy and safe to install and can be used on any vehicle with McPherson struts that are mounted to the stub axles by clevis bolts."
It takes just a few minutes to complete a professional readjustment of the wheel camber with Magic Camber. The mechanic simply replaces the upper bolt currently holding the lower end of the McPherson Strut in place with the Magic Camber bolt. This allows the camber to be adjusted by three degrees either side of centre while the vehicle is on the wheel alignment tester. Magic Camber has been tested and approved by Germany's technical standards agency TÜV.
Magic Camber - an all-new product from Monroe - has been designed to correct camber problems that, to date, Monroe claims have been difficult and expensive to solve. Peter Goodrich, Product Manager for Monroe Australia, said a number of factors could adversely affect a vehicle's wheel camber.
"Driving with tired springs, lowered or raised suspension, over kerbs or fitting lower or wider profile tyres can change the camber of the wheel," said Peter.
"Not only is tyre wear increased, it is also uneven, and tyres have to be replaced more frequently. Driving on uneven tyres can also be extremely dangerous as they can make the car pull to one side and dramatically increase braking distances. Magic Camber comprises a set of two special bolts that are fast, easy and safe to install and can be used on any vehicle with McPherson struts that are mounted to the stub axles by clevis bolts."
It takes just a few minutes to complete a professional readjustment of the wheel camber with Magic Camber. The mechanic simply replaces the upper bolt currently holding the lower end of the McPherson Strut in place with the Magic Camber bolt. This allows the camber to be adjusted by three degrees either side of centre while the vehicle is on the wheel alignment tester. Magic Camber has been tested and approved by Germany's technical standards agency TÜV.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
juror
Suspension DIY
6
Jul 30, 2019 03:28 AM
mjdiaz89
Mechanical Problems/Vehicle Issues and Fix-it Forum
14
Jun 21, 2016 09:26 PM
1khilari
6th Generation Civic 1996 - 2000
12
Jul 9, 2015 08:12 PM
