clicking or creaking question... help!!!
Thread Starter
Registered!!
iTrader: (1)
Joined: Dec 2002
Posts: 1,068
Likes: 0
From: Simi Valley,SoCal, California, US
Rep Power: 0 
clicking or creaking question... help!!! everytime i make a right hand turn no matter if i go fast or slow my car will make a clicking noise while im turning. i have taken it to several places and no one can find anything wrong.. honda said my wheel baring is fine, and another place said my cv boot should be fine to since it isnt leaking. what could it be???????? help this noise has been happening since about 3 months.. i have ground control coil overs and stock shocks.. the front right side is the only side making that noise.
you need to search.. this topic has been covered many times.. there might even be a diy to fix it.. but ill tell you whats happening and what u need to do...
ok whats happening is the spring is turning on the metal purch that it sits on .... metal turnin on metal is what is making the noise . what u need to do is get some thin rubber and line the perch where the spring sits thus allowing the spring to sit on the rubber and not contact the metal perch. this should solve the problem.
ok whats happening is the spring is turning on the metal purch that it sits on .... metal turnin on metal is what is making the noise . what u need to do is get some thin rubber and line the perch where the spring sits thus allowing the spring to sit on the rubber and not contact the metal perch. this should solve the problem.
Samoan<^>(-_-)<^>Power
iTrader: (2)
Joined: Aug 2002
Posts: 1,555
Likes: 1
From: Holloman AFB, NM US
Rep Power: 0 
Thread Starter
Registered!!
iTrader: (1)
Joined: Dec 2002
Posts: 1,068
Likes: 0
From: Simi Valley,SoCal, California, US
Rep Power: 0 Originally posted by OsOBooSTeD
you need to search.. this topic has been covered many times.. there might even be a diy to fix it.. but ill tell you whats happening and what u need to do...
ok whats happening is the spring is turning on the metal purch that it sits on .... metal turnin on metal is what is making the noise . what u need to do is get some thin rubber and line the perch where the spring sits thus allowing the spring to sit on the rubber and not contact the metal perch. this should solve the problem.
you need to search.. this topic has been covered many times.. there might even be a diy to fix it.. but ill tell you whats happening and what u need to do...
ok whats happening is the spring is turning on the metal purch that it sits on .... metal turnin on metal is what is making the noise . what u need to do is get some thin rubber and line the perch where the spring sits thus allowing the spring to sit on the rubber and not contact the metal perch. this should solve the problem.
i would have done a search but i didnt know how to word it or know what to search for, sorry.. but thanks for the info
Registered!!
Joined: Jan 2003
Posts: 18
Likes: 0
From: houston, Texas, US
Rep Power: 0 WHO INSTALLED YOUR SPRINGS FOR U?...CUZ THEY MIGHT HAVE INSTALLED THE TOP STRUT MOUNT WRONG...THE STRUT MOUNT IS ALITTLE DIFFRENT ON OUR CARS...IT SITS AND ANGLE..SO IF U DONT INSTALL IT RIGHT THE TOP MOUNT IS GOING TO MAKE LIKE A CLUNKING NOISE WHEN U TURN....I HAD THE SMAE PROBLEM AND I HAD TO REPLACE MY TOP MOUNT CUZ I WORE IT OUT SO MUCH...BUT GOOD THING I WORK FOR HONDA...CUZ I JUST REPLACED IT MYSELF..UNDER WARRANTY...
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Skunkone
Mechanical Problems/Vehicle Issues and Fix-it Forum
12
Sep 24, 2015 04:38 PM
Juanb24
Mechanical Problems/Vehicle Issues and Fix-it Forum
7
Sep 15, 2015 12:39 AM
Josh 1973
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
Sep 7, 2015 10:10 AM
