Spring install party
Thread Starter
Ask me about your mom.
Joined: Jul 2002
Posts: 2,563
Likes: 0
From: Ottawa, Ontario, Canada
Rep Power: 315 
Spring install party
I'm not offering to host one...but just curious what other peeps got saved up in the basement to install this spring?
So far I've got:
Rearsets
SS braided brake lines
Rear Shock (from a GSX-R 1000)
not much, but it'll totally change the behaviour of my bike
post up, b1tches! it's a celebrashun!!!
So far I've got:
Rearsets
SS braided brake lines
Rear Shock (from a GSX-R 1000)
not much, but it'll totally change the behaviour of my bike
post up, b1tches! it's a celebrashun!!!
Nugget Garage Wannabe
Joined: Jun 2004
Posts: 600
Likes: 0
From: Ottawa area
Rep Power: 0 some wheel studs, so my wheel doesnt fall off again. Still have to order my exhaust parts, as well as some piping so I can make intercooler pipes. Then I just have to tune my car. 
Your bike is going down Jimbo.
Your bike is going down Jimbo. 
I Love Lamp
iTrader: (-1)
Joined: Sep 2004
Posts: 1,773
Likes: 0
From: Ottawa, Ontario, Canada/ Richmond Hill, Ontario, Canada
Rep Power: 0 i'm planning on firing in the aem v2 cai, dc sports exhaust, don't know about headers yet, but it's an idea... short shift kit, and shift **** for now... haha... nothing too major yet
JdMsPark009
Joined: Jun 2004
Posts: 937
Likes: 0
From: Ottawa Ontario
Rep Power: 0 Well I have a couple of things that I have been hording over the winter:
Seats
full polly kit
coil overs
5 ziggen exaust
brakes
cf spoiler
cf hood
rims
take off the altezza's
change my header and sell the old one to jer
tunning this March going to Dyno in Scarborough
Valve adjustment
Throdlle body adjustment
front lower tie bar
JDM cluster (when ever it shows up)
That is it I think but most will be on in the next couple of week I have a lot to get done.
Seats
full polly kit
coil overs
5 ziggen exaust
brakes
cf spoiler
cf hood
rims
take off the altezza's
change my header and sell the old one to jer
tunning this March going to Dyno in Scarborough
Valve adjustment
Throdlle body adjustment
front lower tie bar
JDM cluster (when ever it shows up)
That is it I think but most will be on in the next couple of week I have a lot to get done.
Last edited by sparky009; Feb 24, 2006 at 12:42 PM.
I Love Lamp
iTrader: (-1)
Joined: Sep 2004
Posts: 1,773
Likes: 0
From: Ottawa, Ontario, Canada/ Richmond Hill, Ontario, Canada
Rep Power: 0 i saw some tyc projectors today at goldwing... installed for like 400... they looked so mint!!! i was wondering what tail lights to get as well... damn it, so much stuff i can buy now for it... hahahahaha... 
Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294
Originally Posted by WhiteHalf
I've got
TYC Projectors
ABS Front Grill
HID conversion kit
OEM Fog lights
TYC Projectors
ABS Front Grill
HID conversion kit
OEM Fog lights
Drifting away in time and space...
iTrader: (2)
Joined: Aug 2001
Posts: 2,590
Likes: 0
From: Ottawa, Ontario, Canada
Rep Power: 327 my money is on the bike... sorry Shandon... but with all the trouble you've been having with the car and the van, i just don't think your car will make it over the finish line...
Registered!!
iTrader: (1)
Joined: Jul 2004
Posts: 548
Likes: 0
From: Ottawa, Ontario, Canada
Rep Power: 0 H1 are the bulb size for those projectors ... I believe
and Burnhard ... please stop buying things at overpriced shops. I got mine for $125 USD. Shipping and **** came to about $240 - got stiffed on shipping to the US.
and Burnhard ... please stop buying things at overpriced shops. I got mine for $125 USD. Shipping and **** came to about $240 - got stiffed on shipping to the US.
(¯`·._.·[ I.Ç.E. BÕX ]·._.·´¯)
iTrader: (3)
Joined: May 2003
Posts: 433
Likes: 0
From: Ontario
Rep Power: 0 your wheel fell off!?!?!? while you were driving?
Originally Posted by SuperFishy
some wheel studs, so my wheel doesnt fall off again. Still have to order my exhaust parts, as well as some piping so I can make intercooler pipes. Then I just have to tune my car. Your bike is going down Jimbo.
Your bike is going down Jimbo.
Originally Posted by Karumba
H1 hid kit ? Otherwise was kind of a wasted purchase unless you stick with OEM .. also, you might want to test fit/drill the TYCs before you try sticking them on. And at least all of your work can be done by just removing the front bumper basically
Mikey (I dunno if he baught them yet) Me, and another buddy of mine want to get them. I Love Lamp
iTrader: (-1)
Joined: Sep 2004
Posts: 1,773
Likes: 0
From: Ottawa, Ontario, Canada/ Richmond Hill, Ontario, Canada
Rep Power: 0
Originally Posted by WhiteHalf
H1 are the bulb size for those projectors ... I believe
and Burnhard ... please stop buying things at overpriced shops. I got mine for $125 USD. Shipping and **** came to about $240 - got stiffed on shipping to the US.
and Burnhard ... please stop buying things at overpriced shops. I got mine for $125 USD. Shipping and **** came to about $240 - got stiffed on shipping to the US.
... should be very sploogable... Joined: Apr 2004
Posts: 2,525
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 294
Originally Posted by Si2NV
H1 HID is a waste of money Mikey (I dunno if he baught them yet) Me, and another buddy of mine want to get them.
Mikey (I dunno if he baught them yet) Me, and another buddy of mine want to get them.If he bought a H4 HID kit and then went and installed TYCs, his H4 HID kit would have been a waste of money - unless he stuck with OEM, as his TYCs would be H1 bulbs. Though in any event, TYCs are known to have problems taking HID kits into their sockets and you will probably need to drill the sockets/holes larger to accomodate.
Nugget Garage Wannabe
Joined: Jun 2004
Posts: 600
Likes: 0
From: Ottawa area
Rep Power: 0 haha, ya my wheel fell 1/2 off while i was driving, apperently my old rims dont work with my new rim's lugs, i thought i could make it to the gas station maybe 3 km away. Needless to say i was wrong. but still, my car if all goes well should be trapping around 110-115mph, your bike stock from what I've found on the net does --> Corrected 1/4 mile: 11.87 sec. @ 110.02 mph. which is total ownage of my car. However, last year at luskville your went 13.xx if i'm not mistaken? :P ya im gonna lose but I want a shot at it.
Thread Starter
Ask me about your mom.
Joined: Jul 2002
Posts: 2,563
Likes: 0
From: Ottawa, Ontario, Canada
Rep Power: 315 hehehe launching a bike is hard.....retarded hard. but, i'm better than a couple years ago at luskville. *sigh* straightlines are so boring, though.
something else i might be installing:
if i win an auction on ebay today...i might install different rims/tires on my bike this year. Instead of teh stock 160/60/17, i'll go with 180/60/17's...fatness! I'll have to get a sprocket/chain kit, and rear rotor as well as spacers...so i might sit on the project for a few months. but...should be fun if i get the wheels!! hopefully it won't hurt cornering (superbikes have 180's...so i don't understand why people say it hurts cornering).
bottom line: i'll race you shandon, as long as the trophy is your sister
something else i might be installing:
if i win an auction on ebay today...i might install different rims/tires on my bike this year. Instead of teh stock 160/60/17, i'll go with 180/60/17's...fatness! I'll have to get a sprocket/chain kit, and rear rotor as well as spacers...so i might sit on the project for a few months. but...should be fun if i get the wheels!! hopefully it won't hurt cornering (superbikes have 180's...so i don't understand why people say it hurts cornering).
bottom line: i'll race you shandon, as long as the trophy is your sister
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
mjdiaz89
Mechanical Problems/Vehicle Issues and Fix-it Forum
14
Jun 21, 2016 09:26 PM
Bill in San Jos
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
Jul 10, 2015 12:32 PM
fvckbg
Mechanical Problems/Vehicle Issues and Fix-it Forum
4
Jul 7, 2015 07:08 PM
