Rep Power: 0

I' been through all the forums containing info on how to swap a cluster, but on mine I tried and it dont work. I think its cause the wire harness pins are in the wrong locations. SO IF ANYBODY THAT OWNS A CIVIC EX OR LX YEAR 2003 OR 2004 THAT WANTS TO HELP ME, CAN YOU PLEASE SEND ME A PICTURE OF THE WIRE HARNESS ON BOTH THE BLUE HARNESS AND THE GREEN HARNESS THAT PLUGS INTO YOUR CLUSTER. I NEED A PICTURE THAT CAN SHOW ALL THE WIRES ON BOTH OF THEM SO I CAN GET DOWN WHICH WIRE GOES WHERE ON THE HARNESS. I'M DOING THIS BECAUSE THERE ARE ALOT OF MEMBERS ON THIS PAGE THAT WANTS TO DO A CLUSTER SWAP ON THIER CIVIC DX 2003 OR 2004. ONCE IM DONE I WILL WORK ON A DIY SHOWING HOW TO DO THIS WITH PICTURES AND GUIDES.

THANKS ALOT IF YOU CAN HELP

 
Rep Power: 0

OH Yeah I forgot to mention that if you take your cluster out you will NOT void your warranty or anything and you wont damage anything either. And on the plus side you will be helping out alot of other people with civic dx (vp) that dont have a tach cause the dx(vp) don't come with one.

 
Rep Power: 0

hey i think u posted this up in the wrong area, but how do u take it apart from the dash??

 
Rep Power: 0

here is a site that shows you how to remove it see if it helps you.
http://www.sceniccityonline.com/dxr.html

 
Rep Power: 0

its in the DIY section