Which Header and Downpipe to use for a K20A3 swap?
Thread Starter
Registered!!
Joined: Apr 2006
Posts: 61
Likes: 0
Rep Power: 0 
Which Header and Downpipe to use for a K20A3 swap? I am looking into a K20A3 swap, into my '04 EM2 and need to know if I can use the header and downpipe from the donor EP3.
If so, will it bolt up to my Apex-i GT-spec catback for the '04 EX?
I have tried searching, but have come up with nothing.
If so, will it bolt up to my Apex-i GT-spec catback for the '04 EX?
I have tried searching, but have come up with nothing.
Re: Which Header and Downpipe to use for a K20A3 swap?
no it will not bolt up. You'll have to shorten your existing cat back's B-pipe a bit to bolt up to the stock header/cat from the EP3 (any k20 header for that matter)
Easy fix for an exhaust shop.
also, swapping in a k20a3 is a waste of money. the power difference isn't that great. Swap in a k20a2 at least or a k24 from the tsx.
If i were to do it all over, i would do a frank swap, k24 block with a k20a2 head.
Easy fix for an exhaust shop.
also, swapping in a k20a3 is a waste of money. the power difference isn't that great. Swap in a k20a2 at least or a k24 from the tsx.
If i were to do it all over, i would do a frank swap, k24 block with a k20a2 head.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Dave Brabant
6th Generation Civic 1996 - 2000
20
Oct 6, 2015 12:44 AM
Scout1
Mechanical Problems/Vehicle Issues and Fix-it Forum
12
Oct 5, 2015 01:33 PM
thaler4cuse
Mechanical Problems/Vehicle Issues and Fix-it Forum
6
Sep 7, 2015 08:25 PM
