SRT-4 Injectors?
Joined: Nov 2003
Posts: 3,318
Likes: 0
From: Boise, Idaho
Rep Power: 327 
Originally Posted by Hwoody77
Their stock injectors are 550 (577) CC, people sell them for cheap (Around $40), anyone know if these fit our cars?
DONT PANIC
iTrader: (2)
Joined: Dec 2004
Posts: 2,201
Likes: 1
From: California, Palmdale
Rep Power: 284 yea they work. I have had several sets on my car.
Right now i have stage III injectors on there.
all you need is the damn injector plugs off the SRT harness. Then you install them the same way as the RSX injectors.
Right now i have stage III injectors on there.
all you need is the damn injector plugs off the SRT harness. Then you install them the same way as the RSX injectors.
Originally Posted by turboengnr
yea they work. I have had several sets on my car.
Right now i have stage III injectors on there.
all you need is the damn injector plugs off the SRT harness. Then you install them the same way as the RSX injectors.
Right now i have stage III injectors on there.
all you need is the damn injector plugs off the SRT harness. Then you install them the same way as the RSX injectors.
DONT PANIC
iTrader: (2)
Joined: Dec 2004
Posts: 2,201
Likes: 1
From: California, Palmdale
Rep Power: 284 they work perfect.
I would have pictures, but i dont even have my motor right now. Supposedly it is sitting in someones moms house about 70 miles from here in glendale. I guess its the mom of some guy that works at Exospeed, and used to work at RS. (this is the **** i have been putting up with for 5 months, and the reason my car has been down for soo damn long)
But i guarantee that they fit. They are the same size as the RSX injector. They just flow a lot more.
I would have pictures, but i dont even have my motor right now. Supposedly it is sitting in someones moms house about 70 miles from here in glendale. I guess its the mom of some guy that works at Exospeed, and used to work at RS. (this is the **** i have been putting up with for 5 months, and the reason my car has been down for soo damn long)
But i guarantee that they fit. They are the same size as the RSX injector. They just flow a lot more.
DONT PANIC
iTrader: (2)
Joined: Dec 2004
Posts: 2,201
Likes: 1
From: California, Palmdale
Rep Power: 284 good luck trying to get it to idle. unless you have an emanage, the car probably wont even start.
I dont see why you guys dont believe me on this. I just wrote an unknown chapter on the civic fuel system, not 2 days ago. I have tested this system probably more than anyone else on this board.
FYI, my stock injectors were 12.6 ohms, the SRT were 13.3 (may be vice versa, cant remember). This was close enough to run without any problems.
I dont see why you guys dont believe me on this. I just wrote an unknown chapter on the civic fuel system, not 2 days ago. I have tested this system probably more than anyone else on this board.
FYI, my stock injectors were 12.6 ohms, the SRT were 13.3 (may be vice versa, cant remember). This was close enough to run without any problems.
Joined: Nov 2003
Posts: 3,318
Likes: 0
From: Boise, Idaho
Rep Power: 327
Originally Posted by turboengnr
good luck trying to get it to idle. unless you have an emanage, the car probably wont even start.
I dont see why you guys dont believe me on this. I just wrote an unknown chapter on the civic fuel system, not 2 days ago. I have tested this system probably more than anyone else on this board.
FYI, my stock injectors were 12.6 ohms, the SRT were 13.3 (may be vice versa, cant remember). This was close enough to run without any problems.
I dont see why you guys dont believe me on this. I just wrote an unknown chapter on the civic fuel system, not 2 days ago. I have tested this system probably more than anyone else on this board.
FYI, my stock injectors were 12.6 ohms, the SRT were 13.3 (may be vice versa, cant remember). This was close enough to run without any problems.
Any source on injector clips/connectors?
Joined: Nov 2003
Posts: 3,318
Likes: 0
From: Boise, Idaho
Rep Power: 327
Originally Posted by turboengnr
another thing to mention, if you are looking for aftermarket injectors for your civic, just buy the RC's for the SRT4. They fit. I already tried it.
Thread Starter
Registered!!
iTrader: (13)
Joined: Nov 2001
Posts: 1,040
Likes: 0
From: Newark, New Jersey, US
Rep Power: 0 
Originally Posted by dezod
I'd be VERY interested to see if they work first hand. I do take your word turboengnr, however I am a believer when I can see first hand.
Two things, these are confirmed to fit on RSXes, so I don't see why it would be that much different then our cars, second these things go for about $40-$50 used, for 550CC injectors
Joined: Nov 2003
Posts: 3,318
Likes: 0
From: Boise, Idaho
Rep Power: 327 I asked what application are the RC's based off of?
rsx
rc model number: sl4-550
http://www.honda-tech.com/zerothread?id=1319409
rsx
rc model number: sl4-550
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Bruce2
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
Sep 21, 2015 08:01 PM
