Rep Power: 0

ok so me and a buddy are gonna be installing my turbo finally and i have a quick question


the oil feed line gets tapped into the oil pan and a bung gets welded correct?

what are the steps to installing the oil drain line? ... just a rough description would be fine...

 
Rep Power: 327

I think your a bit confused. the feed line MUST come from either the oil pressure sensor on back of the block, or via a oil filter sandwich adapter like golden eagle makes. The turbo drain on the other hand should tap into the oil pan at as high of a location on the pan as possible. Similar to this photo, sorry its a little blurry. You can also check out the link on my currently lame signature

 
Rep Power: 0

thanks alot man... im turbo handicapped so im just kinda learning as i go along... thanks again

 
Rep Power: 327

NP at all! we all gotta learn some how

 
Rep Power: 0

just looked at your pics for like 20 mins.. they're gonna help BIG time man.. thanks for takin so many of them so noobs like me won't go into the install blind

 
Rep Power: 0

I would REALLY make sure you know what you're doing before you attempt this...

 
Rep Power: 327

i agree with this too, READ LOTS!

 
Rep Power: 0

well, i kinda stretched the truth... im not gonna be doin the actual ''gettin my hands dirty'' type of instal..the guy that is actually gonna be doin the install has never done a 7th gen but he's done tons of eg's and ek's so im just tryin to get the most info i can bout the 7th gens for him..

thanks again