Crower cam update!!!
Thread Starter
Registered!!
iTrader: (1)
Joined: Apr 2003
Posts: 1,165
Likes: 0
From: Orange County, CA
Rep Power: 0 
Crower cam update!!!
there will be a few N/A grinds available, i didn't ask about turbo.
$375 per cam + $309 for spring/retainer kit.
should be available in about 2 weeks.
$375 per cam + $309 for spring/retainer kit.
should be available in about 2 weeks.
Sounds like a serial killer. Is that what you are?
Joined: Sep 2003
Posts: 48
Likes: 0
From: Ft. Stewart , GA
Rep Power: 0 The cams are new, no part numbers yet.
>
> You'll have to order direct as no dealers have the
> cams at this time.
>
> Turbo spec will feature a 188 duration, .238" lobe
> lift, .405" gross lift.
>
> >> Stock D17A2 cam specs:
> >>
> >> Int Mid (VTEC) - Dur @ .050" is 184, lobe lift .199"
> >> Exh Lobe - Dur @ .050" is 170, lobe lift .163"
> >>
> >> Stage 2 N/A Crower spec:
> >>
> >> Int Mid - Dur @ 050 193, lobe lift .237
> >> Exh Lobe - Dur @ 050 180, lobe lift .190
> >>
> >> Looking at about $375 per cam + required
> >> spring/retainer kit (#84166) runs $302.
> >>
> >> Thanks for your interest in Crower,
> >>
> >> Crower Cams & Equipment Co, Inc
> >> 6180 Business Center Court
> >> San Diego, CA 92154-5604 USA
> >> Tel: 619-661-6477
> >> Fax: 619-661-6466
> >> http://www.crower.com
>
> You'll have to order direct as no dealers have the
> cams at this time.
>
> Turbo spec will feature a 188 duration, .238" lobe
> lift, .405" gross lift.
>
> >> Stock D17A2 cam specs:
> >>
> >> Int Mid (VTEC) - Dur @ .050" is 184, lobe lift .199"
> >> Exh Lobe - Dur @ .050" is 170, lobe lift .163"
> >>
> >> Stage 2 N/A Crower spec:
> >>
> >> Int Mid - Dur @ 050 193, lobe lift .237
> >> Exh Lobe - Dur @ 050 180, lobe lift .190
> >>
> >> Looking at about $375 per cam + required
> >> spring/retainer kit (#84166) runs $302.
> >>
> >> Thanks for your interest in Crower,
> >>
> >> Crower Cams & Equipment Co, Inc
> >> 6180 Business Center Court
> >> San Diego, CA 92154-5604 USA
> >> Tel: 619-661-6477
> >> Fax: 619-661-6466
> >> http://www.crower.com
Thread Starter
Registered!!
iTrader: (1)
Joined: Apr 2003
Posts: 1,165
Likes: 0
From: Orange County, CA
Rep Power: 0 i'm so excited! N/A mods are starting to come out!
in the email i recieved, he said there would be multiple N/A cams available.
i know i should do suspension first, but i want a cam!
in the email i recieved, he said there would be multiple N/A cams available.
i know i should do suspension first, but i want a cam!
Originally Posted by coperandy731
Call Crower and talk to Brian. He will let you order it and it takes about a week for them to make it. Just got the turbo cam in the mail yesterday.
How much did it cost?
Registered!!
Joined: Nov 2003
Posts: 1,560
Likes: 0
From: Arkansas
Rep Power: 0 anybody know where i can go to purchase a cam? and anybody know how long it will take to install this? i dont think it should take a while cuz for stage 1 N/A cam you dont need any new springs or rods or whatever but yea...just want to know. thanks.
Joined: Jun 2002
Posts: 3,242
Likes: 0
From: so cal djmota=oscar
Rep Power: 323 
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
ricer_em2
Mechanical Problems/Vehicle Issues and Fix-it Forum
2
May 11, 2016 08:09 PM
OptimisticWay
7th Generation Civic 2001 - 2005
4
Sep 18, 2015 09:37 PM
Juanb24
Mechanical Problems/Vehicle Issues and Fix-it Forum
7
Sep 15, 2015 12:39 AM
