blown motor
Thread Starter
Registered!!
iTrader: (5)
Joined: Feb 2004
Posts: 315
Likes: 0
From: so cal
Rep Power: 0 
blown motor
hey guys, i just needed to vent. i blew my motor on my way home from my girlfriends house tonight. I had a k20a2 in my 02 civic ec sedan. i was racing an srt-4 on the freeway and haging tough dead even so we both got off the freeway and he was like hey that is a badass ride and stuff so i punch after we get going again and when i try to shift from third to fourth, it goes into second and "boom" it blew. I am so pissed right now, i dont even know what to think. I feel like a complete moron. im not asking for simpathy i just feel like **** and i dont know what do. I can get a k20a3 for $400 and maybe if the head is not bad try a head swap but i dont know well see. I can also get a TSX k24 for $3500. I dont know, time is my biggest issue other than money so ill probobly end up with an SI motor but it will get me through for a while and i will probobly get another k20a2 or even a k20a eventually. thanks for listening
Subarus FTW I do NOT miss my civic
iTrader: (9)
Joined: Jul 2004
Posts: 4,595
Likes: 0
From: Scottsdale, AZ
Rep Power: 0 
yeah, that sucks, sorry to hear it. BTW, how did you keep up with a srt4??? I dont believe that part, if you were boosted and swapped, Id believe that, but he probably was a good distance in front of you??
Good luck getting it fixed!
Peace
Good luck getting it fixed!
Peace
Originally Posted by 2K1Civic17"Gabe
yeah, that sucks, sorry to hear it. BTW, how did you keep up with a srt4??? I dont believe that part, if you were boosted and swapped, Id believe that, but he probably was a good distance in front of you??
Good luck getting it fixed!
Peace
Good luck getting it fixed!
Peace
Thread Starter
Registered!!
iTrader: (5)
Joined: Feb 2004
Posts: 315
Likes: 0
From: so cal
Rep Power: 0 
yea he pulled on me on the freeway about length from 70mph to about 140mph. he was yelling out the window when we got off the freeway about how sick my car was and ****. if i had cai i probobly could have beaten him. Members on clubrsx.com dyno with sri and then with cai and gain 8-10whp. that would have been all i needed.
thanks for the sympathy guys.
4drcivic2k1, there is a big hole in the block just above the oil pan. I dont think its salvagable. I hope the head is ok though because i can get a k20a3 for $400 and i will try to head swap.
thanks for the sympathy guys.
4drcivic2k1, there is a big hole in the block just above the oil pan. I dont think its salvagable. I hope the head is ok though because i can get a k20a3 for $400 and i will try to head swap.
do not get a k20a3 block and a2 head ... many members have done this and it's not worth it, imo. a3 has lower comp pistons, unbalanced crank, shitty rods. if you can get an a2 block and head, do it ... there is a guy selling a block and head on k20a.org for 1500, iirc. I don't know what your budget is, but that's a pretty good deal. if you need something, I can try to get you something for cheap ...
Thread Starter
Registered!!
iTrader: (5)
Joined: Feb 2004
Posts: 315
Likes: 0
From: so cal
Rep Power: 0 
Originally Posted by aznboysrfr
do not get a k20a3 block and a2 head ... many members have done this and it's not worth it, imo. a3 has lower comp pistons, unbalanced crank, shitty rods. if you can get an a2 block and head, do it ... there is a guy selling a block and head on k20a.org for 1500, iirc. I don't know what your budget is, but that's a pretty good deal. if you need something, I can try to get you something for cheap ...
are you going to hotimport nights tomorrow?
Originally Posted by wantaturbo
i am going to replace the pisons and rods for sure though, i can get it for $400 and its local, i need to get my car running asap.
are you going to hotimport nights tomorrow?
are you going to hotimport nights tomorrow?

make sure you replace the crank too
Joined: Jun 2002
Posts: 3,242
Likes: 0
From: so cal djmota=oscar
Rep Power: 323 



As long as the head is OK its not that bad. There are alot of k20a2 headless blocks floating around for cheap because of k24 swaps. check around and do NOT use the k20a3 block it can't handle the revs.
Thread Starter
Registered!!
iTrader: (5)
Joined: Feb 2004
Posts: 315
Likes: 0
From: so cal
Rep Power: 0 
Originally Posted by aznboysrfr
yeah, I'm going tomorrow ... I have an extra ticket if you're looking for one 
make sure you replace the crank too

make sure you replace the crank too

Originally Posted by wantaturbo
no i was going but now i cant, my girlfriends grandpa passed away last night so her mom and dad left this morning to vegas where her grandparents live so we have to watch her brother and sister. plus i kinda feel like poo and dont really want to see all these fast cars and **** you know.
at least you haven't been waiting 4+ months for your gotdamn ****ing engine (that you've already paid for) to arrive.
Subarus FTW I do NOT miss my civic
iTrader: (9)
Joined: Jul 2004
Posts: 4,595
Likes: 0
From: Scottsdale, AZ
Rep Power: 0 
if you dont have a wholesale hookup already, if you find a place in AZ with one, Ill call them for ya (after you have a number and possibly seen whats up) and get it at wholesale. Shipping would be a b**** though.






