My turbo project after internals D17a1 LXmanual UPDATED PICS ON POST # 49
#32
Yeah that is true funds are a bitch I know what you mean, its pretty gay cause recently some guy backed up into cause he hauled *** out of his parking spot to show off and ran right into me and my airbags went off so i have a steering wheel that is taped closed, but I want to get some Underglow, headers, turbocharger, the works, but I also dont want to be driving around with a taped up steering wheel and a new steering wheel with hub is like 250-300 is im lucky and thats for a cheap one........
#35
Registered!!
iTrader: (4)
Joined: Jul 2002
Posts: 2,396
Likes: 0
From: *UCF* Orlando, FL
Rep Power: 0 *edit* In reference to abmerop's IC sizing comment...
no no no.... his turbo is actually perfect sized for that IC, the pics might make it look small but it is not small by any means... hector what is the flow capacity of the IC again? and like he said he's not planning on boosting that much daily, no need for a huge as IC unless he's planning on pushing close to 20 PSI and only using the car as race use, it would have soo much pressure drop and lag... anywayz, props to you hec even though your not my fav person right now, lol, i'm over it though, i wanna see if when it's done here in orlando
no no no.... his turbo is actually perfect sized for that IC, the pics might make it look small but it is not small by any means... hector what is the flow capacity of the IC again? and like he said he's not planning on boosting that much daily, no need for a huge as IC unless he's planning on pushing close to 20 PSI and only using the car as race use, it would have soo much pressure drop and lag... anywayz, props to you hec even though your not my fav person right now, lol, i'm over it though, i wanna see if when it's done here in orlando
Last edited by REDchirp; 09-30-2004 at 09:05 AM.
#37
Thread Starter
iTrader: (4)
Joined: Aug 2001
Posts: 2,601
Likes: 0
From: Kissimmee, Florida, US
Rep Power: 311
Originally Posted by REDchirp
*edit* In reference to abmerop's IC sizing comment...
no no no.... his turbo is actually perfect sized for that IC, the pics might make it look small but it is not small by any means... hector what is the flow capacity of the IC again? and like he said he's not planning on boosting that much daily, no need for a huge as IC unless he's planning on pushing close to 20 PSI and only using the car as race use, it would have soo much pressure drop and lag... anywayz, props to you hec even though your not my fav person right now, lol, i'm over it though, i wanna see if when it's done here in orlando
no no no.... his turbo is actually perfect sized for that IC, the pics might make it look small but it is not small by any means... hector what is the flow capacity of the IC again? and like he said he's not planning on boosting that much daily, no need for a huge as IC unless he's planning on pushing close to 20 PSI and only using the car as race use, it would have soo much pressure drop and lag... anywayz, props to you hec even though your not my fav person right now, lol, i'm over it though, i wanna see if when it's done here in orlando
But you are right I'll be boosting about 10psi daily till I get all the buggs worked out then I'll move to 12- 14.
I'm getting a boost controler to dial boost up when need it.
I drive my car every day and I just wanted to be reliable and ballsy
Last edited by Supermex; 09-30-2004 at 03:40 PM.
#41
Thread Starter
iTrader: (4)
Joined: Aug 2001
Posts: 2,601
Likes: 0
From: Kissimmee, Florida, US
Rep Power: 311
Originally Posted by tfnaaf
Supermex, what you planning on for exhaust manifold ?
fabricated by the guys at Dynamic Speedlab in Brandon FL
#42
Joined: Nov 2003
Posts: 3,318
Likes: 0
From: Boise, Idaho
Rep Power: 309
Originally Posted by Supermex
Custom made equal lengh manifold done with 8 gauge stainelss steel 3046
fabricated by the guys at Dynamic Speedlab in Brandon FL
fabricated by the guys at Dynamic Speedlab in Brandon FL
#47
what kind of pistons and rods did you install? looking to do the same to my car in the spring.also P&P.and sleeve.not worried about the money..now im curious to find out if i can get a place in nj to fab. a intake manifold for me.
#48
Thread Starter
iTrader: (4)
Joined: Aug 2001
Posts: 2,601
Likes: 0
From: Kissimmee, Florida, US
Rep Power: 311 We have a new beautifull stainless equal lenght mani that just fabricated but because I want to keep the A/C intact I couldn't use it.
I'll need to contact Dynamic Speedlab and see how much they want for it.
But know that you'll have to remove the A/C compresor.
For more info on the internals, perst numbers, prices ,contacts got to the Turbo FAQ on top of this forum.
My car should be ready to dyno by the first week on November.
I'll need to contact Dynamic Speedlab and see how much they want for it.
But know that you'll have to remove the A/C compresor.
For more info on the internals, perst numbers, prices ,contacts got to the Turbo FAQ on top of this forum.
My car should be ready to dyno by the first week on November.
#53
Thread Starter
iTrader: (4)
Joined: Aug 2001
Posts: 2,601
Likes: 0
From: Kissimmee, Florida, US
Rep Power: 311 Sponsors will only give you good prices, they will sacrifice profit.
You'll still have to pay for most of it, and have to work for the sponsor to sell and promote thier product.(nothing is free)
Its taking me 2 years to do my cars performance.
How much?...... well let's say I have to work lot's of overtime.
Take in account that no sponsor will do anything on a stock car, you'll have to do lot's of work on it and lot's of PR to deserve it.
So it's not that easy.
You'll still have to pay for most of it, and have to work for the sponsor to sell and promote thier product.(nothing is free)
Its taking me 2 years to do my cars performance.
How much?...... well let's say I have to work lot's of overtime.
Take in account that no sponsor will do anything on a stock car, you'll have to do lot's of work on it and lot's of PR to deserve it.
So it's not that easy.
Last edited by Supermex; 11-11-2004 at 07:30 PM.
#56
Joined: Feb 2003
Posts: 21,820
Likes: 1
From: OH-IO
Rep Power: 493 looks great man. that manifold is beautifuly
just a couple thing though, you defeniatly need a filter for the turbo, dont wannt be suckin in anything bad into it and fcukin it up.
also, why is you BOV on the bend of your IC piping near the bumper and not on your charge pipe?
just a couple thing though, you defeniatly need a filter for the turbo, dont wannt be suckin in anything bad into it and fcukin it up.
also, why is you BOV on the bend of your IC piping near the bumper and not on your charge pipe?
#57
7thgen Power Maker
iTrader: (74)
Joined: Sep 2003
Posts: 9,048
Likes: 1
From: Buffalo, NY, US
Rep Power: 0
Originally Posted by abmerop18
looks great man. that manifold is beautifuly
just a couple thing though, you defeniatly need a filter for the turbo, dont wannt be suckin in anything bad into it and fcukin it up.
also, why is you BOV on the bend of your IC piping near the bumper and not on your charge pipe?
just a couple thing though, you defeniatly need a filter for the turbo, dont wannt be suckin in anything bad into it and fcukin it up.
also, why is you BOV on the bend of your IC piping near the bumper and not on your charge pipe?
#58
Originally Posted by abmerop18
looks great man. that manifold is beautifuly
just a couple thing though, you defeniatly need a filter for the turbo, dont wannt be suckin in anything bad into it and fcukin it up.
also, why is you BOV on the bend of your IC piping near the bumper and not on your charge pipe?
just a couple thing though, you defeniatly need a filter for the turbo, dont wannt be suckin in anything bad into it and fcukin it up.
also, why is you BOV on the bend of your IC piping near the bumper and not on your charge pipe?
edit:nvm dezod answered it
#59
Custom Titles are played out
Joined: Feb 2003
Posts: 1,980
Likes: 0
From: Pensacola, Florida
Rep Power: 284
Originally Posted by dezod
You can use your BOV in either location. Closest to the I/C or to the TB. Some people even use 2 BOVs (one in each location).
Not to sidetrack the thread...
btw Nice *** car mex.. looking CLEAN, and good! Hope it runs b-e-a-utiful!
back to the question for dezod..
Why would you run 2 bovs? Does it make something more efficient or what?
#60
7thgen Power Maker
iTrader: (74)
Joined: Sep 2003
Posts: 9,048
Likes: 1
From: Buffalo, NY, US
Rep Power: 0
Originally Posted by RiceRocketeer
Not to sidetrack the thread...
btw Nice *** car mex.. looking CLEAN, and good! Hope it runs b-e-a-utiful!
back to the question for dezod..
Why would you run 2 bovs? Does it make something more efficient or what?
btw Nice *** car mex.. looking CLEAN, and good! Hope it runs b-e-a-utiful!
back to the question for dezod..
Why would you run 2 bovs? Does it make something more efficient or what?