JE Piston Specs for Turbo Applications
Thread Starter
Joined: Sep 2001
Posts: 26,407
Likes: 0
From: Lexington, KY
Rep Power: 584 
JE Piston Specs for Turbo Applications
Bore= 2.953
Comp Height= 1.061
Forging= 73mm
Pin Dia= .748
Pin Length= 2.250
JE .050 Wire Locks
Dish= -.185
Top Ring= 1.0mm
2nd ring= 1.2mm
Oil Ring= 2.8mm
Piston Weigh= 221
Part# 214588
Job# 377958
i dont really know what all the numbers mean but there had been a few people asking me for the numbers and specs, so there they are
Comp Height= 1.061
Forging= 73mm
Pin Dia= .748
Pin Length= 2.250
JE .050 Wire Locks
Dish= -.185
Top Ring= 1.0mm
2nd ring= 1.2mm
Oil Ring= 2.8mm
Piston Weigh= 221
Part# 214588
Job# 377958
i dont really know what all the numbers mean but there had been a few people asking me for the numbers and specs, so there they are
Tell me what you don't like about yourself....
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (12)
Joined: Oct 2002
Posts: 12,576
Likes: 0
From: Columbia, SC, USA
Rep Power: 413 Originally posted by detoX
i didnt see the compresion of the piston?
i didnt see the compresion of the piston?
Thread Starter
Joined: Sep 2001
Posts: 26,407
Likes: 0
From: Lexington, KY
Rep Power: 584 i went through a local shop, but the ending distributor was dynamic autosports, out in cali
they are 9:1
all that info was on the side of the box, so thats what i posted
they are 9:1
all that info was on the side of the box, so thats what i posted
Joined: Feb 2003
Posts: 10,823
Likes: 0
From: Bay Area, CA
Rep Power: 401 9:1? whats stock the stock c/r? i would think for a turbo application it would be lower like 8:1 or 8.5:1
Registered!!
Joined: Jun 2004
Posts: 336
Likes: 0
From: Port Coquitlam, Vancouver
Rep Power: 0
Originally Posted by bradmanuwf
I saw somewhere that had a list of all the honda engines and their compressions. the ex was a 9.5 or 9.6. and the lx was a 9.2 I think. but don't quote me.
Last edited by aellerman; Mar 15, 2005 at 01:12 PM.
Registered!!
Joined: Jun 2004
Posts: 336
Likes: 0
From: Port Coquitlam, Vancouver
Rep Power: 0
Originally Posted by BudDyLeEBoOsteD
I wonder how high PSI's can i run with those pistons/setup?
runs 10 daily (when he feels like rippin) and 5 when he's jus chillin...
i pm'd him alottta questions, thats why i know these answers
Registered!!
Joined: Feb 2005
Posts: 201
Likes: 0
From: Tampa,Fl
Rep Power: 0 
..
Originally Posted by aellerman
the creater of this thread (dont wanna type out his confusing *** name) ran 14psi on race fuel with just these pistons...
runs 10 daily (when he feels like rippin) and 5 when he's jus chillin...
i pm'd him alottta questions, thats why i know these answers
runs 10 daily (when he feels like rippin) and 5 when he's jus chillin...
i pm'd him alottta questions, thats why i know these answers
haha
Thread Starter
Joined: Sep 2001
Posts: 26,407
Likes: 0
From: Lexington, KY
Rep Power: 584
Originally Posted by teampointless
jeebus... bringin **** back from the dead again....
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Elciteeve
Mechanical Problems/Vehicle Issues and Fix-it Forum
3
Sep 28, 2015 12:40 PM
thaler4cuse
Mechanical Problems/Vehicle Issues and Fix-it Forum
6
Sep 7, 2015 08:25 PM
Butterfli13
Archive - Wanted Parts (WTB's)
3
Aug 12, 2015 11:04 PM
