iDesigns needs your help....
I'm REALLY diggin' that M3 front-end photochop. If someone made a full current M3 style body kit for our cars, complete with the cutouts in the rear bumper for the dual exhaust, I'd SO buy that, lol. I'd even get the dual exhaust... but, then again, I'm insane. 
lol
That Celica does look really nice, though. A body kit like that would probably look pretty good on our cars... although, I'd probably have to see a photochop of some sort to get a feel for it. I don't know if I'd buy it, though.
lolThat Celica does look really nice, though. A body kit like that would probably look pretty good on our cars... although, I'd probably have to see a photochop of some sort to get a feel for it. I don't know if I'd buy it, though.
I Queef > You
iTrader: (11)
Joined: Feb 2002
Posts: 2,348
Likes: 0
From: San Diego, California, US
Rep Power: 0 
I really like the M3 kit too, somebody did that chop like over a year ago but I saved the pic. I agree with whoever said that we should have somewhat of a euro look on our cars. And I also think that the kit shouldn't have a big mouth wide open for intercoolers. Not feeling a widebody b/c I think only really wide rims would make the kit look complete, with the fender flares and all. Hopefully with a simple kit, it'll be something everybody can afford.
I'm likin the euro idea, that m3 chop looks pretty tight if i do say so....but i also like the rally look to them as well....and def not any big mouths or wide body....save those for the cars that actually can use those to their advantage more than us....i was just lookin around and found the buddy club 3 that i actually liked quite a bit...it has a nice clean look to it, esp for the rear...
Actually, I just had an idea... not so much a widebody, but if someone were to make an M3 front, side skirts, and rear bumper for our cars, they could also sell seperately some front and rear fender flares for the people that want it. It'd make it have that similar look to a real M3. I think it would look pretty awesome, personally. If someone were to make a kit like that, I'd be REALLY tempted to buy the whole thing and have my car repainted in a BMW silver, LOL. 
Thread Starter
Registered!!
iTrader: (3)
Joined: Jul 2001
Posts: 1,525
Likes: 0
From: Los Angeles, California, US
Rep Power: 317 If you guys really want the M3 stlye kit and i get a number of people down for it, i can totally make this happen. It DOES not have to be a widebody. If you guys vote on the M3 style kit over the C-West, it can totally happen. I just need more interest in it but so far, things look pretty good. More feedback is welcomed
Thread Starter
Registered!!
iTrader: (3)
Joined: Jul 2001
Posts: 1,525
Likes: 0
From: Los Angeles, California, US
Rep Power: 317 My employer had informed me that the RSX conversion wouldnt be possible cuz he doenst see a good market for it. THe Kit that we are going to be released is going to be mass produced so basically anything kit wise (lip/body) fender flares, wide body, etc... Thanks for interest...Trong
as for rears: i thought of somethin more like this but not so long wise..
its simply done and not too crazy of a kit. it looks like a lip but its a whole rear kit.
imagine what our 7thgens would look like with that rear kit along with a nice shiny exhaust slanting out of their.
its simply done and not too crazy of a kit. it looks like a lip but its a whole rear kit.
imagine what our 7thgens would look like with that rear kit along with a nice shiny exhaust slanting out of their.
heres another, but imagine this one without those pointy edges on both sides of the rear and just a little more "box-ish" with the sharp design.
Last edited by jttegx; May 5, 2004 at 07:19 PM.
i thought a side kit like this would look nice...
it has a air dam,vented, gap, w.e u call it. but somethin similar to that and more of that "sleek" and simple design. some kits may look good at certain angles, i think we need somethin that looks good at all angles.
it has a air dam,vented, gap, w.e u call it. but somethin similar to that and more of that "sleek" and simple design. some kits may look good at certain angles, i think we need somethin that looks good at all angles.
Last edited by jttegx; May 5, 2004 at 07:18 PM.
I'm still all for the M3 kit. I think E46 (current generation) M3 front bumper, side skirts, and a rear bumper (complete with cutouts for the dual exhaust) and optional fender flares would be AWESOME for our cars. I'd definitely save up for a kit like that, 100%. It'd make our cars look so amazingly aggressive and bad-@$$ without going too overboard and being distasteful.
Thread Starter
Registered!!
iTrader: (3)
Joined: Jul 2001
Posts: 1,525
Likes: 0
From: Los Angeles, California, US
Rep Power: 317 Originally posted by runner1738
the best way to do this would be to get some one to photochop pics of kits then make a poll and see which one wins
the best way to do this would be to get some one to photochop pics of kits then make a poll and see which one wins
Thread Starter
Registered!!
iTrader: (3)
Joined: Jul 2001
Posts: 1,525
Likes: 0
From: Los Angeles, California, US
Rep Power: 317 can i get a show of hands on whose interested in the m3 kit. like i said, we need at least 10 to get this produced and i can already price it as well.
Well, you already have that photochopped pic of the Civic with the M3 front-end earlier on in the thread, and I just busted out a quicky of a Civic with an M3 rear-end. Not too shabby for my first photochop, lol. Well, anyway, here it is:
I couldn't figure out how to change the colors so they match... but you get the idea... I hope, lol. I'll try to do some sides, with some fender flares like the M3 has, hopefully, lol.
I couldn't figure out how to change the colors so they match... but you get the idea... I hope, lol.
I'll try to do some sides, with some fender flares like the M3 has, hopefully, lol. 
hmm... maybe if the rear was straightened out more. but those are still good chops.
im liking the front, i think it should be more wide to match with the fender flares and such.
for the rear... i dunno, theirs 2 outlets for exhaust(s). im thinking... theirs no company that makes a dual exhaust for our cars. =| but having a gap on the other side can be ok i guess.
overall, maybe you guys can produce a widebody m3 style kit.
which can include: front bumper, front 2 fenders, side skirts, rear fender flares, rear bumper. all the works to complete a wide body kit. BUT we do love cheap prices lol and if u think about it, civic owners are real picky about what they buy for their cars cuz their so many choices. cant expect a high price for a owner of a civic. 
just my opinion and .02
im liking the front, i think it should be more wide to match with the fender flares and such.
for the rear... i dunno, theirs 2 outlets for exhaust(s). im thinking... theirs no company that makes a dual exhaust for our cars. =| but having a gap on the other side can be ok i guess.
overall, maybe you guys can produce a widebody m3 style kit.
which can include: front bumper, front 2 fenders, side skirts, rear fender flares, rear bumper. all the works to complete a wide body kit. BUT we do love cheap prices lol
and if u think about it, civic owners are real picky about what they buy for their cars cuz their so many choices. cant expect a high price for a owner of a civic. just my opinion and .02
If they could do this kit for close to $1300 like they did for the Celica kit, or less, then I'm in for sure. Just give me the word that it's a go for them to start working on making the body kit, and I'll start saving my money. By the time they'd finish making the kit I'd definitely have enough saved up to buy it. Just gimme the word. lol
We really need more people to voice in their opinions, though. I'm getting kind of crazy about this whole M3-styled body kit, but I need to remember that we need 10+ for this to work, and I'm not sure how many people would want a kit that looks like this... Hopefully quite a few. LoL
lolWe really need more people to voice in their opinions, though. I'm getting kind of crazy about this whole M3-styled body kit, but I need to remember that we need 10+ for this to work, and I'm not sure how many people would want a kit that looks like this... Hopefully quite a few.
LoL Thread Starter
Registered!!
iTrader: (3)
Joined: Jul 2001
Posts: 1,525
Likes: 0
From: Los Angeles, California, US
Rep Power: 317 lookin pretty good. Like i said, i need 10 peeps to start production. it'll only take about 2 weeks give or take to get a mold finished. As for flares, im not sure how much extra tahts gonna be. Are you guys interested in teh flares as well???
